3D preview of Micro RC Servo Arm (28T)
Loading the interactive model…
Interactive 3D model of Micro RC Servo Arm (28T)

Gears and transmission

Micro RC Servo Arm (28T)

1 views
Bounding box
13 × 8 × 7 mm
Engine
3D Printing B-rep
Parameters
10
Published
November 20, 2026

Download

Free to download and use. See the terms.

The prompt

create a RC Servo arm for a micro rc servo. it needs to have 28 teeth to fit on the servo and the teeth should slide on the servo gear around 4,5mm. in the center needs to be a hole with a diameter of 2,1mm for the screw. the length of the arm from center servo gear hole to where the acomodating screw will be needs to be 7mm. the hole at the end of the arm needs to have a diameter of 1mm. there the arm needs to raise about 4mm

Parameters

NameValueRange
Arm length centre-to-centre7 mm4 – 20
End hole diameter1 mm0.6 – 2.5
End boss height4 mm1 – 8
Centre screw hole2.1 mm1.2 – 4
Number of spline teeth28 mm10 – 48
Spline engagement depth4.5 mm2 – 8
Arm width4 mm3 – 8
Arm thickness3 mm2 – 6
Hub diameter8 mm6 – 16
Hub top wall above spline1.6 mm1 – 4

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Micro RC Servo Arm (28T) - Free CAD Model (STEP, STL) | TextoCAD