Plates and panels
Margined Plate
- Bounding box
- 330.0 × 10.0 × 125.0 mm
- Engine
- Precision B-rep
- Parameters
- 6
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Sketch Mode → pick the X-Z plane (horizontal plane, since X=length, Z=width, Y=up). Draw a rectangle from corner (X=−5, Z=−255) to corner (X=325, Z=−130) — this gives a plate 330 mm long in X and 125 mm wide in Z, with 25 mm extra margin on both X ends and 20 mm extra on both Z sides beyond the pressure footprint. Draw the sketch on a plane at Y=54, then exit sketch and Pull the rectangle up +10 mm in Y so the top face sits at Y=64 (matching where the aligned pressure field lives). Final plate: X from −5 to 325, Z from −255 to −130, Y from 54 to 64.
Parameters
| Name | Value | Range |
|---|---|---|
| X Minimum | -5 mm | -50 – 50 |
| X Maximum | 325 mm | 280 – 400 |
| Y Minimum (bottom) | 54 mm | 40 – 70 |
| Y Maximum (top) | 64 mm | 55 – 80 |
| Z Minimum | -255 mm | -300 – -100 |
| Z Maximum | -130 mm | -200 – -50 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,