3D preview of M16 Hex Castle Nut
Loading the interactive model…
Interactive 3D model of M16 Hex Castle Nut

Plates and panels

M16 Hex Castle Nut

4 views
Bounding box
24 × 27.7 × 19 mm
Engine
3D Printing B-rep
Parameters
11
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Create a 3D CAD model of an M16 hexagonal slotted castle nut in millimeters. Total height is 19 mm. Start with a hexagonal body with width across flats of 24 mm and height of 13 mm. At the bottom, add a washer face of diameter 22.5 mm and height 0.8 mm. On top of the 13 mm hexagonal body, add a coaxial cylindrical collar of outer diameter 22.5 mm extending from 13 mm to the total height of 19 mm (height of collar is 6 mm). Cut 6 equally spaced radial slots through the top collar and partway down into the hexagon, each slot being 4.5 mm wide and deep enough to reach the 13 mm base level. Add a central through-hole bore of 16 mm diameter.

Parameters

NameValueRange
Total height19 mm10 – 40
Bottom washer diameter22.5 mm10 – 50
Bottom washer height0.8 mm0.4 – 3
Hex width across flats24 mm10 – 60
Hex body top height13 mm5 – 35
Collar outer diameter22.5 mm10 – 50
Central bore diameter16 mm5 – 40
Number of slots6 mm3 – 12
Slot width4.5 mm1 – 12
Slot depth6 mm1 – 20
Slot bottom fillet radius1 mm0.2 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

M16 Hex Castle Nut - Free CAD Model (STEP, STL) | TextoCAD