Gears and transmission
Line Following Robot Chassis Plate
- Bounding box
- 200.0 × 240.0 × 3.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
All selected Mechanical Engineering candidates are required to design a Line Following Robot (LFR) chassis using SOLIDWORKS. Please ensure that the following design requirements are met: 1. Maximum Dimensions: 10 × 10 inches (length × width). 2. Centre of Gravity (COG): Must be located at or as close as possible to the geometrical centre of the chassis. 3. Chassis Thickness: 2–3 mm. 4. Weight: The chassis should be lightweight, with a target weight of 150–200 grams. 5. Design: The chassis must provide suitable mounting arrangements for motors, wheels, sensors, battery and electronic components. 6. Strength: The design must be sufficiently rigid and durable to withstand competition conditions.
Parameters
| Name | Value | Range |
|---|---|---|
| Chassis Length (Y) | 240 mm | 150 – 254 |
| Chassis Width (X) | 200 mm | 100 – 254 |
| Plate Thickness | 3 mm | 2 – 3 |
| Corner Radius | 12 mm | 2 – 25 |
| Lightening Slot Width | 30 mm | 10 – 45 |
| Lightening Slot Length | 48 mm | 20 – 80 |
| Motor Offset from Centreline | 82 mm | 40 – 110 |
| Motor Offset Rearward | 85 mm | 30 – 115 |
| Motor Mount Slot Spacing | 20 mm | 10 – 40 |
| Motor Slot Length | 12 mm | 6 – 25 |
| Motor Slot Width | 3.4 mm | 2.5 – 5.5 |
| Sensor Channel Count | 5 pcs | 1 – 9 |
| Sensor Hole Pitch | 12 mm | 6 – 25 |
| Sensor Row Offset Forward | 105 mm | 60 – 118 |
| Sensor Mount Hole Dia | 3.2 mm | 2 – 5 |
| M3 Clearance Hole Dia | 3.2 mm | 2 – 5 |
| Caster Offset Forward | 85 mm | 30 – 112 |
| Caster Bolt Square | 16 mm | 8 – 30 |
| Controller Hole Spacing X | 66 mm | 30 – 100 |
| Controller Hole Spacing Y | 24 mm | 10 – 60 |
| Controller Offset Y | -8 mm | -60 – 40 |
| Battery Strap Centre Y | 45 mm | 10 – 90 |
| Battery Strap Spacing | 30 mm | 10 – 60 |
| Strap Slot Length | 22 mm | 10 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
