Plates and panels
Lenovo X395 Laptop Cooling Lap Stand (A1 Split)
- Bounding box
- 320 × 231.7 × 73.9 mm
- Engine
- 3D Printing B-rep
- Parameters
- 16
- Published
- November 3, 2026
Download
Free to download and use. See the terms.
The prompt
this must be fit in bambu a1 printer build plate when printed
Parameters
| Name | Value | Range |
|---|---|---|
| Width of laptop support | 320 mm | 260 – 400 |
| Depth of laptop support front-to-back | 230 mm | 200 – 250 |
| Front edge height above lap | 15 mm | 8 – 30 |
| Tilt angle | 12 deg | 5 – 25 |
| Material wall / rail thickness reference | 3 mm | 2 – 6 |
| Outer size of 120 mm fan | 120 mm | 80 – 140 |
| Fan body thickness | 25 mm | 10 – 40 |
| Fan corner screw spacing | 105 mm | 90 – 120 |
| Clearance hole for M3 screw | 3.4 mm | 2.5 – 4 |
| Air slot width - finger safe | 3.2 mm | 2.5 – 5 |
| Number of air slots per fan | 14 mm | 6 – 24 |
| Front stopper height above deck | 8 mm | 4 – 15 |
| Front stopper thickness along deck | 6 mm | 3 – 12 |
| Sliding clearance of the joint | 0.25 mm | 0.1 – 0.6 |
| Tongue length locking the halves | 10 mm | 4 – 20 |
| Tongue width along the depth axis | 40 mm | 15 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec