Plates and panels
Latch Mounting Plate
- Bounding box
- 275 × 40 × 6 mm
- Engine
- 3D Printing B-rep
- Parameters
- 8
- Published
- November 13, 2026
Download
Free to download and use. See the terms.
The prompt
Create a rectangular flat plate. Dimensions: width 275mm, height 40mm, thickness 6mm. Feature 1: Cut two through-holes with a diameter of 25mm. The distance between the centers of these holes must be exactly 230mm (115mm from the center of the plate). The centers of the holes should be located 12.5mm from the top edge (leaving a 1.5mm wall). Feature 2: Cut a 10x10mm square through-hole for a latch mechanism. Position it exactly in the center of the plate horizontally (X=0, if center is 0), and position it 10mm from the bottom edge vertically. (This hole will hold the rotating latch).
Parameters
| Name | Value | Range |
|---|---|---|
| Plate width | 275 mm | 40 – 400 |
| Plate height | 40 mm | 15 – 200 |
| Plate thickness | 6 mm | 2 – 20 |
| Through-hole diameter | 25 mm | 5 – 40 |
| Distance between hole centres | 230 mm | 20 – 360 |
| Hole centre from top edge - 12.5 radius + 1.5 wall | 14 mm | 8 – 30 |
| Square latch hole side | 10 mm | 3 – 30 |
| Latch hole centre from bottom edge | 10 mm | 2 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component