Organic and sculpted
L-bracket
- Bounding box
- 97.9 × 81.0 × 120 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create an L-bracket with a 60mm x 50mm horizontal base and a 60mm x 70mm vertical wall, uniform wall thickness of 5mm. Center the base on the XY plane. Add a 22mm diameter center hole on the vertical wall, 35mm above the base. Add four 4.5mm mounting holes on the horizontal base, 8mm from each corner. Apply a 3mm fillet to the inner corner and 2mm fillets to all outer sharp edges
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Glock 19 Lower Receiver
Glock 19 lower receiver
BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Turtle Basking Dock
I need a basking dock that will sit on top of a 75 gallon tank it’s from left to right will be 18 inch’s and from back to front will be 20 inch’s and the ramp for the turtle to com
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
