KuKirin G4 Sport Front Fender

Design a sporty, aggressive and functional front fender for a KuKirin G4 electric scooter. The fender must securely mount to the front fork/arm holding the front wheel. Use the supplied measurements and reference images for the mounting dimensions — do not guess them. Optimize the entire design specifically for: * PETG * Bambu Lab P1S * 0.4 mm nozzle * 0.42 mm line width * General Bambu Lab PETG settings Make it strong but lightweight. Do not simply make the fender bulky; use smart geometry, ribs and reinforced mounting areas where needed. Use generous fillets around stress points. The fender must be designed to print WITHOUT supports. Minimize overhangs and use angled/curved surfaces where possible. Optimize the print orientation and tilt for maximum printability and good layer adhesion. Keep the complete model below 249 × 249 × 249 mm. Provide generous tire clearance for wheel movement, dirt, debris and PETG tolerances. Make the final model: * Watertight/manifold * Free of self-intersections * STL-ready * Strong enough for real-world scooter vibration and use * Sporty and visually integrated with the KuKirin G4 Prioritize: mounting strength, tire clearance, printability, support-free printing, lightweight construction, then appearance. If possible, make the design parametric so fork diameter, mounting-hole size/spacing, tire clearance, fender width/length and wall thickness can easily be adjusted.

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.