Gears and transmission
Knuckle Joint Assembly
- Bounding box
- 403.0 × 105.0 × 104.0 mm
- Engine
- Precision B-rep
- Parameters
- 24
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
Create a realistic, fully assembled 3D MODEL OF A TRADITIONAL MECHANICAL KNUCKLE JOINT. IMPORTANT: Use the FIRST reference image as the exact visual and structural reference. Do NOT create a shaft coupling, gear, cylindrical connector, or any other mechanism. ### 1. REQUIRED ORIENTATION - Both connecting rods must extend horizontally in opposite directions along the X-axis. - The knuckle pin must be vertical along the Z-axis. - The eye and fork holes must be vertical. - The single eye must fit between the two fork lugs. - The final model must visually resemble a conventional industrial knuckle joint. ### 2. SINGLE EYE COMPONENT - Connecting rod diameter: 45 mm. - Eye outer diameter: 105 mm. - Eye thickness: 30 mm. - Eye hole diameter: 56 mm. - Create a circular eye at the end of the horizontal rod. - The eye must have a genuine through-hole. - Join the eye smoothly to the rod. ### 3. FORK COMPONENT - Connecting rod diameter: 45 mm. - Fork outer diameter: 105 mm. - Two fork lugs, each 15 mm thick. - Gap between fork lugs: 32 mm. - Fork hole diameter: 56 mm. - Create two parallel, symmetrical lugs. - Both lugs must have aligned through-holes. - The single eye must fit inside the gap between the lugs. ### 4. VERTICAL KNUCKLE PIN - Pin diameter: 55 mm. - Pin overall length: 104 mm. - Pin head diameter: 85 mm. - Pin head thickness: 28 mm. - Collar diameter: 85 mm. - Collar thickness: 14 mm. - Locking hole diameter: 6 mm. - Pin must pass vertically through the fork and eye. - Add a hexagonal pin head at the top, similar to the first reference image. - Add the lower collar and locking arrangement. ### 5. ASSEMBLY POSITION - Position the single eye centrally between the fork lugs. - Align the three holes on one common vertical axis. - Insert the pin through all three holes. - Position the pin head above the assembly. - Position the collar below the assembly. - Both rods must extend horizontally in opposite directions. - Do not position the rods vertically. - Do not place the rods along the pin axis. ### 6. VISUAL APPEARANCE - Use realistic metallic grey material. - Use smooth cylindrical surfaces. - Use rounded transitions where appropriate. - Keep the assembly compact and symmetrical. - Show the complete assembled joint in an isometric view. - Make the pin head and collar clearly visible. - Do not add gears, teeth, threaded central cylinders, shaft couplings, or unnecessary components. ### 7. SCRIPT VALIDATION - Define a top-level function named exactly build(params). - Do not nest the build function. - Generate all geometry inside build(params). - Use only the supported Text2CAD geometry API. - Return the complete assembled CAD model. - Maintain all specified dimensions in millimetres. - Ensure the script passes AST validation. FINAL REQUIREMENT: The output must look like the FIRST reference image, not the second image. Prioritize the correct knuckle joint geometry, component arrangement and orientation over decorative details.
Parameters
| Name | Value | Range |
|---|---|---|
| Eye Rod Diameter | 45 mm | 20 – 80 |
| Eye Rod Length | 150 mm | 50 – 300 |
| Eye Outer Diameter | 105 mm | 60 – 160 |
| Eye Thickness | 30 mm | 10 – 60 |
| Eye Hole Diameter | 56 mm | 20 – 90 |
| Eye/Rod Fillet | 4 mm | 0 – 10 |
| Fork Lug Outer Diameter | 105 mm | 60 – 160 |
| Fork Lug Thickness | 15 mm | 5 – 40 |
| Fork Gap | 32 mm | 10 – 80 |
| Fork Hole Diameter | 56 mm | 20 – 90 |
| Fork Rod Diameter | 45 mm | 20 – 80 |
| Fork Rod Length | 150 mm | 50 – 300 |
| Fork Web Thickness | 15 mm | 5 – 50 |
| Fork Fillet | 4 mm | 0 – 10 |
| Pin Diameter | 55 mm | 20 – 90 |
| Hex Pin Head Across Flats | 85 mm | 30 – 150 |
| Pin Head Thickness | 28 mm | 8 – 60 |
| Pin Overall Length | 104 mm | 80 – 200 |
| Collar Diameter | 85 mm | 30 – 150 |
| Collar Thickness | 14 mm | 5 – 40 |
| Locking Hole Diameter | 6 mm | 2 – 12 |
| Locking Hole X Offset | 0 mm | -10 – 10 |
| Split Pin Diameter | 6 mm | 2 – 12 |
| Split Pin Length | 100 mm | 30 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
