Gears and transmission
Knobby-Wheel Rover Miniature
- Bounding box
- 78.4 × 68.3 × 54.1 mm
- Engine
- Precision B-rep
- Parameters
- 29
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
Transform the uploaded reference image into a stylized miniature collectible figure, then generate a complete 3D model optimized for FDM 3D printing. STAGE 1 — MINIFIGURE DESIGN: * Convert the original subject into a compact miniature collectible figure. * Preserve its recognizable identity, major structural elements, and distinctive features. * Simplify complicated mechanical details into clean geometric shapes. * Use smooth organic curves, rounded corners, and slightly exaggerated proportions where appropriate. * Maintain the original subject’s characteristic colors and overall appearance. * Create a professional, attractive miniature toy aesthetic. STAGE 2 — 3D GEOMETRY: * Convert the miniature concept into a complete three-dimensional model. * Generate all sides and surfaces, including areas not visible in the reference image. * Use solid geometry rather than flat surfaces or visual textures. * Integrate small decorative features into the main geometry. * Make the bottom flat and stable. STAGE 3 — FDM MANUFACTURING: * Make the entire miniature ONE continuous, connected, watertight solid. * No separate assemblies, loose parts, floating components, or moving mechanisms. * Strengthen thin features and fragile protrusions. * Avoid unnecessary overhangs and minimize support requirements. * Ensure the model is manifold and suitable for FDM printing. * Account for a standard 0.4 mm nozzle. OUTPUT: * Target longest dimension: 80 mm. * Export STL or 3MF for printing. * Export STEP if available for Fusion 360 editing. * Prioritize a clean, durable, printable model over excessive detail. IMPORTANT: The final result must look like a professionally designed collectible miniature while remaining a physically manufacturable 3D object.
Parameters
| Name | Value | Range |
|---|---|---|
| Body Width (X) | 50 mm | 30 – 80 |
| Body Depth (Y) | 44 mm | 25 – 70 |
| Body Height | 20 mm | 10 – 40 |
| Body Corner Radius | 5 mm | 0.5 – 12 |
| Body Bottom Height | 9.5 mm | 4 – 20 |
| Trim Lip Overhang | 0.9 mm | 0.4 – 2 |
| Trim Band Height | 1.6 mm | 0.6 – 4 |
| Turret Flange Diameter | 26 mm | 12 – 45 |
| Turret Flange Height | 4 mm | 1 – 10 |
| Turret Neck Diameter | 20 mm | 8 – 40 |
| Turret Neck Height | 6 mm | 2 – 15 |
| Camera Pod Width (X) | 12 mm | 6 – 26 |
| Camera Pod Depth (Y) | 10 mm | 6 – 24 |
| Camera Pod Height | 13 mm | 6 – 30 |
| Camera Pod Corner Radius | 2 mm | 0.3 – 5 |
| Lens Diameter | 7 mm | 3 – 14 |
| Lens Protrusion | 1.5 mm | 0.5 – 4 |
| Wheel Tire Diameter | 28 mm | 14 – 50 |
| Wheel Thickness | 7 mm | 3 – 16 |
| Wheel Spacing (Y) | 18 mm | 8 – 40 |
| Tread Knob Radius | 1.6 mm | 0.6 – 4 |
| Tread Knob Count | 16 count | 6 – 30 |
| Axle Diameter | 7 mm | 3 – 16 |
| Axle Length | 6 mm | 2 – 20 |
| Hub Cap Diameter | 11 mm | 4 – 26 |
| Hub Cap Protrusion | 1.5 mm | 0.4 – 5 |
| Hub Recess Count | 8 count | 4 – 12 |
| Hub Recess Diameter | 3 mm | 1 – 8 |
| Hub Recess Circle Radius | 8 mm | 0 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
