Loading the interactive model…
Interactive 3D model of Knee Joint with Tibia and Fibula RotationEverything else
Knee Joint with Tibia and Fibula Rotation
3 views
- Bounding box
- 51.0 × 115.9 × 8.0 mm
- Engine
- Precision B-rep
- Parameters
- 12
- Published
- September 10, 2026
Download
Free to download and use. See the terms.
The prompt
create a knee joint where tibia can rotate about 150 degrees and fibia can rotate about 30 degrees
Parameters
| Name | Value | Range |
|---|---|---|
| Upper Link Length (Femur) | 60 mm | 20 – 150 |
| Lower Link Length (Tibia) | 70 mm | 20 – 150 |
| Fibula Link Length | 50 mm | 20 – 150 |
| Link Width | 12 mm | 5 – 30 |
| Thickness | 8 mm | 3 – 20 |
| Hinge Outer Diameter | 20 mm | 10 – 50 |
| Pin Hole Diameter | 6 mm | 2 – 20 |
| Mounting Hole Diameter | 5 mm | 2 – 15 |
| Mounting Hole Count per Link | 2 | 1 – 5 |
| Tibia Rotation Angle (deg) | 150 deg | 0 – 180 |
| Fibula Rotation Angle (deg) | 30 deg | 0 – 90 |
| Fillet Radius | 1.5 mm | 0 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS