Plates and panels
Intraoral Bite Registration Jig
- Bounding box
- 45.0 × 14.6 × 4.8 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- August 7, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a 3D CAD model of a medical-grade intraoral bite registration jig consisting of a flat, elongated occlusal plate and an integrated handle wing. 1. Main Body & Plate: - Create a rounded rectangular base plate with dimensions: length 24 mm, width 10 mm, and thickness 2 mm. - The top surface of the plate must feature a shallow recessed pocket measuring 0.5 mm in depth for bite material placement, surrounded by parallel grip ridges. 2. Handle & Wing: - Extrude a transition section extending from the plate into a flat handle wing, bringing the total length of the component to roughly 46 mm. - Add non-symmetrical geometric alignment features and tactile grip lines along the upper surface of the handle wing. - At the terminal end of the handle, pierce a circular safety hole with a diameter of 3 mm designed for dental floss attachment. 3. Side Profile & Tolerances: - The overall vertical height of the stacked jig body should be modeled at 4.5 mm with smooth, rounded edge fillets (radius 0.5 mm) for patient comfort and intraoral safety.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 24 mm | 15 – 35 |
| Plate Width | 10 mm | 6 – 15 |
| Plate Thickness | 2 mm | 1 – 4 |
| Pocket Depth | 0.5 mm | 0.3 – 1.5 |
| Pocket Border Width | 1.5 mm | 0.5 – 3 |
| Handle Length | 22 mm | 10 – 40 |
| Overall Height | 4.5 mm | 3 – 8 |
| Edge Fillet Radius | 0.5 mm | 0.1 – 2 |
| Safety Hole Diameter | 3 mm | 1.5 – 5 |
| Grip Ridge Count per Side | 5 | 2 – 10 |
| Grip Ridge Width | 0.8 mm | 0.2 – 2 |
| Alignment Notch Length | 5 mm | 2 – 10 |
| Alignment Notch Depth | 2 mm | 1 – 4 |
| Tactile Groove Count | 6 | 2 – 15 |
| Tactile Groove Depth | 0.3 mm | 0.1 – 1 |
| Tactile Groove Width | 0.5 mm | 0.2 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con