3D preview of Internal Ring Gear Quadrant + Pinion (Exploded)
Loading the interactive model…
Interactive 3D model of Internal Ring Gear Quadrant + Pinion (Exploded)

Gears and transmission

Internal Ring Gear Quadrant + Pinion (Exploded)

3 views
Bounding box
385.0 × 325.0 × 20 mm
Engine
3D Printing B-rep
Parameters
19
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

A quadrant of a ring gear 600mm in diameter to the outside. The ring gear should be 20mm in width - so the internal diameter should be 580mm. The teeth should be internal. The thickness should be 20mm with 6 equally distanced countersunk holes of 4mm diameter. The fixing holes should be 40mm from the end of the ring gear quadrant then equally spaced across the ring gear. There should be a corresponding pinion drive gear of approximately 50mm with an 8mm D shape central hole for a stepper motor drive shaft. The gears should have helical teeth for smooth engagement and 20 degrees normal pressure angle. They will be 3d printed so nees stl files

Parameters

NameValueRange
Spacing between part origins360 mm330 – 1000
Outside diameter600 mm200 – 1000
Internal diameter at tooth tips580 mm100 – 990
Axial thickness20 mm5 – 100
Number of internal teeth (full 360)288 mm48 – 600
Normal pressure angle20 deg14 – 30
Radial tooth depth2.5 mm1 – 10
Number of fixing holes6 mm2 – 12
Through-hole diameter4 mm2 – 12
Countersink diameter7 mm4 – 20
First hole arc distance from quadrant end40 mm0 – 200
Helix angle15 deg0 – 45
Outside diameter50 mm20 – 120
Number of pinion teeth23 mm8 – 80
Axial thickness20 mm5 – 100
Normal pressure angle20 deg14 – 30
D-hole diameter8 mm3 – 20
D-hole flat offset from centre2 mm0 – 6
Helix angle15 deg0 – 45

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.