Plates and panels
Interior Floor Plan Model
- Bounding box
- 120 × 90 × 24.4 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
he scope includes: Dimensioned floor plans 2D furniture layout plans Millwork and custom built-in drawings Interior elevations and detail drawings Reflected ceiling plans with lighting placement Mechanical design-intent layouts Electrical design-intent layouts Plumbing design-intent layouts Material and finish specification sheets documenting selections and sources
Parameters
| Name | Value | Range |
|---|---|---|
| Overall plan length, X | 120 mm | 60 – 200 |
| Overall plan depth, Y | 90 mm | 50 – 200 |
| Wall thickness | 3 mm | 2 – 6 |
| Wall height above finished floor | 22 mm | 8 – 60 |
| Floor slab thickness | 2.4 mm | 1.2 – 6 |
| Door clear opening width | 16 mm | 8 – 40 |
| Door centre, from left edge | 34 mm | 5 – 190 |
| Window opening width | 26 mm | 8 – 80 |
| Window centre, from left edge | 96 mm | 5 – 190 |
| Window sill height above floor | 10 mm | 2 – 50 |
| Window head height above floor | 18 mm | 4 – 60 |
| Partition centre, from left edge | 72 mm | 10 – 190 |
| Partition front end, Y | 40 mm | 0 – 120 |
| Sofa length | 40 mm | 15 – 90 |
| Sofa depth | 16 mm | 8 – 40 |
| Sofa seat height | 6 mm | 2 – 20 |
| Coffee table diameter | 20 mm | 8 – 50 |
| Coffee table height | 5 mm | 2 – 20 |
| Bed width | 28 mm | 12 – 60 |
| Bed length | 40 mm | 16 – 80 |
| Bed base height | 4 mm | 1 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,