Plates and panels
Indexing Disc and Locking Pin
- Bounding box
- 175.0 × 170.0 × 100.1 mm
- Engine
- Precision B-rep
- Parameters
- 15
- Published
- October 5, 2026
Download
Free to download and use. See the terms.
The prompt
3. Prompts prontos por peça 15 – Disco de indexação Create a circular disc, outer diameter 100 mm, thickness 20 mm, with a central through hole of 25 mm diameter and a keyway 8 mm wide. Add two radial holes of 10 mm diameter, 12 mm deep, on the outer rim, exactly 180 degrees apart. Add 1 mm chamfers on the outer edges. Axis of the disc along X. Arquivo sugerido: 15_disco_indexacao.step 16 – Pino de trava Create a cylindrical locking pin, diameter 10 mm, length 100 mm. One end has a 1 mm chamfer. The other end has a round knob head, 30 mm diameter and 15 mm thick, with a 3 mm fillet. Axis along Y. Arquivo sugerido: 16_pino_trava.step
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded layout gap | 150 mm | 50 – 500 |
| Disc outer diameter | 100 mm | 20 – 200 |
| Disc thickness | 20 mm | 5 – 50 |
| Center bore diameter | 25 mm | 5 – 80 |
| Keyway width | 8 mm | 2 – 20 |
| Keyway depth | 3 mm | 1 – 10 |
| Radial hole diameter | 10 mm | 2 – 30 |
| Radial hole depth | 12 mm | 2 – 50 |
| Outer edge chamfer | 1 mm | 0.1 – 5 |
| Pin diameter | 10 mm | 2 – 30 |
| Pin overall length | 100 mm | 20 – 300 |
| Pin end chamfer | 1 mm | 0.1 – 5 |
| Knob head diameter | 30 mm | 10 – 100 |
| Knob head thickness | 15 mm | 2 – 50 |
| Knob-to-pin fillet | 3 mm | 0.5 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Snorlax Phone Stand
Create a compact, 3D printable, support-free cute Snorlax phone stand with a small footprint measuring 90mm wide, 80mm deep, and 70mm tall. The model features a simplified, low-pol
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec