Everything else
Hydro-Rocket & Adjustable Launch Pad
- Bounding box
- 260.0 × 383.3 × 381.4 mm
- Engine
- Precision B-rep
- Parameters
- 26
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
dame 1 plano como propuesta para mi clase de física, para hacer un hidro - cohete de material reciclado con estas especificaciones: Clear visual representations including side view, front/rear view, approximate dimensions (length, diameter), fin count/shape/position, and nose cone profile. Include a safe launch base design that allows angle control, Materials List: Specific components required for construction, Design Characteristics: Summary of physical structure and geometry, Physics Justification: Apply at least 3 physics concepts (e.g., projectile motion, air resistance/drag, momentum, center of pressure, pressure/thrust, stability) explaining how the design maximizes horizontal range, Expected Performance: Predicted range, height (≤ 1m constraint compliance), flight stability, key advantages, and potential drawbacks. Haz el plano en ingles
Parameters
| Name | Value | Range |
|---|---|---|
| Body length | 220 mm | 100 – 400 |
| Body diameter | 100 mm | 50 – 160 |
| Nose cone height | 90 mm | 20 – 200 |
| Nose tip diameter | 12 mm | 2 – 40 |
| Fin count | 3 count | 3 – 6 |
| Fin root chord | 100 mm | 20 – 200 |
| Fin tip chord | 40 mm | 10 – 120 |
| Fin span beyond body | 55 mm | 10 – 120 |
| Fin thickness | 3 mm | 1 – 10 |
| Fin offset from base | 8 mm | 0 – 100 |
| Launch angle from vertical | 45 deg | 0 – 80 |
| Rocket base height on rail | 70 mm | 0 – 200 |
| Launch rail diameter | 10 mm | 4 – 30 |
| Launch rail length | 400 mm | 150 – 800 |
| Rail length below pivot | 60 mm | 20 – 200 |
| Pivot pin height | 100 mm | 40 – 240 |
| Pivot pin diameter | 10 mm | 4 – 30 |
| Base plate width (X) | 260 mm | 120 – 400 |
| Base plate depth (Y) | 220 mm | 120 – 400 |
| Base plate thickness | 12 mm | 4 – 30 |
| Ground-stake hole dia | 8 mm | 3 – 16 |
| Base plate corner fillet | 6 mm | 0 – 20 |
| Upright spacing (centre to centre) | 90 mm | 50 – 200 |
| Upright thickness | 12 mm | 5 – 30 |
| Upright depth (Y) | 70 mm | 30 – 150 |
| Upright height above pivot | 35 mm | 10 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like