Gears and transmission
Hydraulic Torque Wrench - Exploded
- Bounding box
- 2132 × 153.1 × 133.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 33
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
Create a simple 3D mechanical CAD model of a hydraulic torque wrench. Include: 1. Compact rectangular metal housing. 2. Hydraulic cylinder inside the housing. 3. Two connecting rods forming a toggle linkage. 4. Sector gear connected to the linkage. 5. Replaceable 1/2 inch square output shaft. 6. Mechanical reaction arm. Show all parts separately in an assembled mechanical design. Use realistic proportions and simple geometry. Create editable 3D CAD solids, not a rendered illustration.
Parameters
| Name | Value | Range |
|---|---|---|
| Exploded layout gap | 300 mm | 240 – 500 |
| Housing length | 240 mm | 160 – 300 |
| Housing width | 90 mm | 60 – 150 |
| Housing height | 70 mm | 40 – 120 |
| Housing wall thickness | 3.2 mm | 1.6 – 8 |
| Front bearing boss OD | 38 mm | 20 – 60 |
| Front bearing boss length | 16 mm | 8 – 30 |
| Rear mount width | 22 mm | 12 – 40 |
| Rear mount height | 18 mm | 10 – 40 |
| Rear mount depth | 12 mm | 8 – 24 |
| Cylinder OD | 65 mm | 40 – 100 |
| Cylinder body length | 150 mm | 100 – 250 |
| Piston rod diameter | 20 mm | 10 – 40 |
| Piston rod stroke | 60 mm | 30 – 120 |
| Link overall length | 80 mm | 50 – 150 |
| Link width / end diameter | 18 mm | 8 – 40 |
| Link thickness | 12 mm | 4 – 30 |
| Link pin hole diameter | 8 mm | 4 – 20 |
| Sector gear outer radius | 110 mm | 60 – 160 |
| Sector gear thickness | 16 mm | 6 – 40 |
| Gear tooth arc | 70 deg | 30 – 120 |
| Number of gear teeth | 12 mm | 8 – 24 |
| Square bore size | 12.7 mm | 8 – 25 |
| Output shaft square size | 12.7 mm | 8 – 25 |
| Output shaft length | 35 mm | 20 – 80 |
| Output flange diameter | 28 mm | 16 – 50 |
| Output flange thickness | 5 mm | 2 – 12 |
| Reaction arm length | 200 mm | 120 – 350 |
| Reaction arm width | 25 mm | 12 – 60 |
| Reaction arm thickness | 16 mm | 6 – 40 |
| Reaction arm slot width | 10 mm | 6 – 30 |
| Reaction arm slot length | 50 mm | 20 – 100 |
| Reaction arm pin hole diameter | 12 mm | 6 – 30 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
