Organic and sculpted
Humanoid Robot Torso Shell
- Bounding box
- 120 × 66.7 × 94.0 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 16, 2026
Download
Free to download and use. See the terms.
The prompt
绘制人形机器人躯干外壳实体,总机器人身高1750mm,躯干范围:胯上端面到肩关节顶面,躯干高度550mm。 肩宽(左右肩关节中心距)560mm,躯干前后厚度220mm。 左右肩关节安装法兰:ISO9409-1-50-4-M6,法兰面朝外侧,法兰面与躯干侧面齐平,法兰中心高度距离胯面490mm。 躯干顶部中心预留颈部安装法兰,PCD40mm,4×M5通孔,颈法兰中心距离胯面550mm。 躯干底部是腰关节输出法兰,自定义PCD80mm,6×M6安装孔,中心走线孔Φ20。 外壳壁厚4mm,整体外轮廓平滑过渡,边角R8,内部掏空,预留走线空腔,无多余装饰曲面,实体模型,单位mm,输出STEP文件。
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
Eyeglass Frame (SDF)
Create a **fully parametric, engineering-grade 3D CAD model** of a modern rectangular eyeglass frame optimized for **FDM 3D printing**, with **all components printable separately a
Rectangular Box
create a simple rectangular box with exact dimensions.
