149.060.0134.9
Loading the interactive model…
Interactive 3D model of Housing with grip (part 4)

Gears and transmission

Housing with grip (part 4)

2 views
Bounding box
60.0 × 149.0 × 134.9 mm
Engine
Precision B-rep
Parameters
20
Published
November 15, 2026

Download

Free to download and use. See the terms.

The prompt

Smart acetabular reamer, part 4 (revision B): hollow pistol-grip housing. Barrel OD 60 x 130, 3 mm wall, front wall with nose tube hole and LED ring screw holes on a 40 mm circle, bulkheads for gearbox (20 mm bore) and chuck bearing, raked hollow grip with trigger slot, pivot and selector holes, battery shoe with dovetail rails. Revision: the battery contact pocket is now a 10.4 mm channel open at the rear of the shoe so the battery's raised contact block can slide in along the rails. Origin at the centre of the barrel rear face, +Z forward, +Y up.

Parameters

NameValueRange
Barrel outer diameter60 mm50 – 70
Barrel length130 mm110 – 150
Wall thickness3 mm2 – 5
Front wall thickness4 mm2 – 8
Nose tube hole23 mm20 – 30
LED ring screw pitch circle40 mm32 – 50
Grip width at top34 mm26 – 40
Grip length at top44 mm34 – 54
Grip width at bottom30 mm24 – 38
Grip length at bottom40 mm30 – 50
Grip top centre (Z)50 mm35 – 70
Grip bottom (Y)-115 mm-130 – -95
Grip rake angle15 deg0 – 25
Trigger slot width13 mm10 – 16
Trigger slot height32 mm24 – 40
Battery shoe length60 mm50 – 70
Battery shoe width50 mm40 – 60
Rail spacing36 mm28 – 44
Contact channel width10.4 mm9.8 – 14
Grip-to-barrel fillet6 mm0 – 10

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Housing with grip (part 4) - Free CAD Model (STEP, STL) | TextoCAD