Gears and transmission
Housing with grip (part 4)
- Bounding box
- 60.0 × 149.0 × 134.9 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- November 15, 2026
Download
Free to download and use. See the terms.
The prompt
Smart acetabular reamer, part 4: hollow pistol-grip housing. Barrel OD 60 x 130 with 3 mm wall, front wall with nose tube hole and LED ring screw holes, internal bulkheads for motor/gearbox and chuck bearing, raked hollow grip with trigger slot, pivot and selector holes, battery shoe with dovetail rails. Origin at the centre of the barrel rear face, +Z forward, +Y up.
Parameters
| Name | Value | Range |
|---|---|---|
| Barrel outer diameter | 60 mm | 50 – 70 |
| Barrel length | 130 mm | 110 – 150 |
| Wall thickness | 3 mm | 2 – 5 |
| Front wall thickness | 4 mm | 2 – 8 |
| Nose tube hole | 23 mm | 20 – 30 |
| LED ring screw pitch circle | 44 mm | 36 – 50 |
| Grip width at top | 34 mm | 26 – 40 |
| Grip length at top | 44 mm | 34 – 54 |
| Grip width at bottom | 30 mm | 24 – 38 |
| Grip length at bottom | 40 mm | 30 – 50 |
| Grip top centre (Z) | 50 mm | 35 – 70 |
| Grip bottom (Y) | -115 mm | -130 – -95 |
| Grip rake angle | 15 deg | 0 – 25 |
| Trigger slot width | 13 mm | 10 – 16 |
| Trigger slot height | 32 mm | 24 – 40 |
| Battery shoe length | 60 mm | 50 – 70 |
| Battery shoe width | 50 mm | 40 – 60 |
| Rail spacing | 36 mm | 28 – 44 |
| Grip-to-barrel fillet | 6 mm | 0 – 10 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
