Plates and panels
Hollow Laptop Bridge Wedge with Glass Slot
- Bounding box
- 19.5 × 6.3 × 1.8 mm
- Engine
- Precision B-rep
- Parameters
- 8
- Published
- September 24, 2026
Download
Free to download and use. See the terms.
The prompt
Create a single-piece, extra-wide 3D-printable laptop bridge wedge with a full-width glass slot using the following geometric bounds and operations: 1. MAIN BODY: Create a hollow right-angle triangular wedge block with a total side-to-side width of 19.5 inches, a front-to-back length of 6.25 inches, and a maximum back height of 1.75 inches. The top face must slope downward uniformly from the back height of 1.75 inches to a front height of 1.25 inches to create a large forward-sloping writing ramp surface. 2. GLASS RECESSED TRACK: Cut a thin, uniform rectangular slot directly into the sloped top face of the wedge. The slot must be 18.06 inches wide (side-to-side), 6.06 inches long (front-to-back), and 0.25 inches deep. Center this slot perfectly along the 19.5-inch width of the sloped top surface. The floor of this recessed slot must maintain the exact same downward slope angle as the main wedge body so the 18x6 inch raw glass panel drops in and sits completely flush and sub-surface inside the ramp. Ensure the final 3D model is a single manifold mesh with clean intersecting boolean operations.
Parameters
| Name | Value | Range |
|---|---|---|
| Overall Width | 19.5 mm | 10 – 50 |
| Overall Length | 6.25 mm | 3 – 20 |
| Back Height | 1.75 mm | 0.5 – 5 |
| Front Height | 1.25 mm | 0.5 – 5 |
| Wall Thickness | 1 mm | 0.2 – 1.5 |
| Slot Width | 18.06 mm | 10 – 19 |
| Slot Length | 6.06 mm | 4 – 6.2 |
| Slot Depth | 0.25 mm | 0.1 – 1 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service