Hollow Box with Cutouts

> Generate a hollow rectangular box with outer dimensions of 285mm height, 175mm width, and 225mm depth, with a uniform wall thickness of 15mm. Apply a 10mm fillet to the four edges of the front face. Perform the following extruded cuts through the walls: On the front face, cut a 120mm diameter circle centered 110mm from the bottom, a 45mm diameter circle centered 220mm from the bottom, and two 25mm diameter circles positioned 35mm from the bottom and 90mm apart. On the back face, cut a rectangular pocket 250mm tall and 145mm wide. On the left face, cut a 20mm diameter circle centered 50mm from the front edge and 142.5mm from the bottom. On the bottom face, add four solid cylindrical extrusions 15mm in diameter and 5mm tall, placed 20mm inward from each corner. >

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.