Plates and panels
Hoist Guard Gasket Washer
- Bounding box
- 56 × 56 × 3 mm
- Engine
- 3D Printing B-rep
- Parameters
- 4
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
I need a gasket for a guard on the bottom of a hoist, where the hook connects to the chain. At that joint, the guard is a metal washer that wears down the contact link. I want the gasket to fit inside that piece. The dimensions of the washer I want to restrict are: outer circumference = 56mm inner circumference = 23mm The link that passes inside the inner circumference is approximately 19mm high vertically x 6.25mm wide.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 56 mm | 40 – 100 |
| Inner diameter | 23 mm | 5 – 35 |
| Thickness | 3 mm | 1 – 10 |
| Outer edge chamfer | 0.8 mm | 0.1 – 1.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Gabinete Gamer DeX com Suporte Interno para Hub USB-C
Atualize o projeto 3D existente sem mudar o restante do design. - Esconda o hub USB-C em um compartimento interno com tampa removível. - Crie um suporte para o hub entre duas pare
Rectangular Duct Elbow 90
creat a 3d hvac rectanglar duct elbow with a 90degree bend . duct width 30mm , height 200mm, and sheet metal thickness 0.8mm.
1000L IBC Tote Water Tank Assembly
Prompt: A 3D CAD model of a standard 1000L industrial IBC tote water tank. The inner container is a white, hollow high-density polyethylene (HDPE) plastic cube with deeply contoure
Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
Interdigital Electrode Pattern
### FIG. 2 — Top plan view of the interdigital electrode pattern *Suggested template: USPTO Line Art / Electronic Circuit* ``` FIG. 2: A top plan (bird's-eye) view of an interdigi
FPV Drone Frame (Exploded)
I want a design of a FPV 5 inch carbon frame of a FPV drone racing. Inspied on switchback five 33 frame and similar to BCROW v7. 5mm arms and 2mm top and bottom plate. Make a desig
