Plates and panels
Hinged Box Side Hinge
- Bounding box
- 106.5 × 50 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 11
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
hinge should be on short side and be as discrete (but functional) as possible
Parameters
| Name | Value | Range |
|---|---|---|
| Outer length | 100 mm | 20 – 300 |
| Outer width | 50 mm | 20 – 200 |
| Total outer height | 20 mm | 10 – 150 |
| Wall thickness | 2 mm | 1.2 – 5 |
| Floor thickness | 2 mm | 1.2 – 5 |
| Lid plate thickness | 3 mm | 2 – 8 |
| Lid locating lip depth | 2 mm | 1 – 6 |
| Lip clearance per side | 0.25 mm | 0.1 – 0.5 |
| Barrel outer diameter | 6 mm | 4 – 12 |
| Pin diameter | 3 mm | 2.5 – 6 |
| Pin clearance per side | 0.2 mm | 0.1 – 0.5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four