Gears and transmission
Herringbone gear test
- Bounding box
- 74.5 × 51.0 × 12.0 mm
- Engine
- Precision B-rep
- Parameters
- 1
- Published
- November 8, 2026
Download
Free to download and use. See the terms.
The prompt
Diagnostic: can the sandbox build 16 and 49 tooth herringbone gears (two helical halves joined at mid-width) quickly?
Parameters
| Name | Value | Range |
|---|---|---|
| Helix angle | 25 deg | 15 – 35 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.