Loading the interactive model…
Interactive 3D model of Heltec LoRa Enclosure with 5-Way Nav and Back ButtonEverything else
Heltec LoRa Enclosure with 5-Way Nav and Back Button
1 views
- Bounding box
- 84.0 × 60.5 × 27.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 11, 2026
Download
Free to download and use. See the terms.
The prompt
5x3.5 CM screen and make sure the buttons have a hole in them to the inside
Parameters
| Name | Value | Range |
|---|---|---|
| Enclosure Length | 80 mm | 60 – 120 |
| Enclosure Width | 60 mm | 40 – 100 |
| Enclosure Height | 25 mm | 15 – 50 |
| Wall Thickness | 2 mm | 1 – 5 |
| Faceplate Thickness | 2 mm | 1 – 5 |
| Board Length | 58 mm | 40 – 80 |
| Board Width | 28 mm | 20 – 50 |
| Board Thickness | 1.6 mm | 1 – 3 |
| OLED Window Width | 50 mm | 20 – 80 |
| OLED Window Height | 35 mm | 20 – 60 |
| Battery Length | 50 mm | 30 – 70 |
| Battery Width | 30 mm | 20 – 50 |
| Battery Thickness | 6 mm | 3 – 10 |
| Button Diameter | 8 mm | 5 – 15 |
| Button Spacing | 15 mm | 10 – 25 |
| Back Button Offset | 10 mm | 5 – 20 |
| Switch Length | 12 mm | 8 – 20 |
| Switch Width | 6 mm | 4 – 10 |
| USB-C Width | 8.5 mm | 6 – 12 |
| USB-C Height | 3 mm | 2 – 5 |
| Vent Hole Diameter | 3 mm | 2 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
STEPSTLGLB5 PARAMS
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
STEPSTLGLB24 PARAMS
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like
STEPSTLGLB6 PARAMS