Gears and transmission
Helical Ring Gear Segment and Pinion (Exploded)
- Bounding box
- 235.6 × 503.0 × 20 mm
- Engine
- 3D Printing B-rep
- Parameters
- 18
- Published
- November 20, 2026
Download
Free to download and use. See the terms.
The prompt
112.5° ring gear segment. 600mm in diameter to the outside. The ring gear should be 20mm in width - so the internal diameter should be 580mm. The teeth should be internal. The thickness should be 20mm with 6 equally distanced countersunk holes of 4mm diameter. The fixing holes should be 40mm from the end of the ring gear quadrant then equally spaced across the ring gear. There should be a corresponding pinion drive gear of approximately 50mm with an 5mm D shape central hole for a stepper motor drive shaft. The gears should have helical teeth for smooth engagement and 20 degrees normal pressure angle. They will be 3d printed so nees stl files
Parameters
| Name | Value | Range |
|---|---|---|
| Gap between exploded parts | 40 mm | 10 – 100 |
| Gear module | 2.5 mm | 1 – 5 |
| Helix angle | 20 deg | 0 – 45 |
| Normal pressure angle | 20 deg | 14.5 – 25 |
| Ring gear outside diameter | 600 mm | 400 – 800 |
| Ring gear root inside diameter | 580 mm | 380 – 780 |
| Ring gear axial thickness | 20 mm | 10 – 40 |
| Sector angle | 112.5 deg | 90 – 180 |
| Teeth in sector | 72 mm | 40 – 120 |
| Number of fixing holes | 6 mm | 3 – 12 |
| Fixing hole diameter | 4 mm | 3 – 6 |
| Countersink diameter | 8 mm | 5 – 12 |
| Countersink depth | 2 mm | 1 – 4 |
| First hole from sector end | 40 mm | 20 – 80 |
| Pinion tooth count | 18 mm | 12 – 30 |
| Pinion axial thickness | 20 mm | 10 – 40 |
| D bore diameter | 5.2 mm | 4 – 8 |
| D bore flat offset | 1.9 mm | 0 – 3 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
