Gears and transmission
Helical Gear 30T (20 deg right-hand helix)
- Bounding box
- 30 × 30 × 10 mm
- Engine
- 3D Printing B-rep
- Parameters
- 5
- Published
- November 21, 2026
Download
Free to download and use. See the terms.
The prompt
A 3D helical gear with 30 teeth, 30 mm outer diameter, 10 mm thickness (face width), and an 8 mm central through-hole. The gear teeth are twisted at a 20-degree right-hand helix angle along the Z-axis. Clean solid mechanical part in millimeters.
Parameters
| Name | Value | Range |
|---|---|---|
| Number of teeth | 30 mm | 8 – 80 |
| Outer diameter | 30 mm | 10 – 200 |
| Face width | 10 mm | 2 – 60 |
| Central bore diameter | 8 mm | 2 – 50 |
| Helix (spiral) angle at pitch circle | 20 deg | 0 – 45 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
