Plates and panels
Graduated Ruler with Crank Disc
- Bounding box
- 149.6 × 150.0 × 310.0 mm
- Engine
- Precision B-rep
- Parameters
- 19
- Published
- August 29, 2026
Download
Free to download and use. See the terms.
The prompt
REV A — 1,750 mm WALKING HUMANOID 1. Master CAD dimensions Overall target height: 1,750 mm Ground plane: Y = 0 Centreline: X = 0 Material: Mild steel Main link material: 30 × 10 mm flat bar Major structural plates: 6 mm steel plate Major pivots: Ø16 mm Main drive shaft: Ø25 mm Secondary shafts: Ø12–16 mm Use P1 as the CAD origin: P1 = X 0, Y 0 Positive Y is upwards.
Parameters
| Name | Value | Range |
|---|---|---|
| Ruler Height | 300 mm | 50 – 500 |
| Ruler Width | 30 mm | 10 – 80 |
| Ruler Thickness | 10 mm | 2 – 20 |
| Base Width | 80 mm | 40 – 150 |
| Base Thickness | 6 mm | 3 – 20 |
| Mount Hole Diameter | 5 mm | 3 – 12 |
| Mount Hole Offset | 30 mm | 10 – 60 |
| Major Interval | 10 mm | 5 – 50 |
| Minor Interval | 2 mm | 1 – 10 |
| Tick Depth | 1 mm | 0.5 – 3 |
| Major Tick Width | 2 mm | 1 – 5 |
| Minor Tick Width | 1 mm | 0.5 – 3 |
| Major Tick Height | 8 mm | 3 – 20 |
| Minor Tick Height | 4 mm | 2 – 10 |
| Crank Diameter | 150 mm | 80 – 200 |
| Crank Thickness | 10 mm | 5 – 20 |
| Crank Bore Diameter | 25 mm | 10 – 40 |
| Crank Pin Diameter | 16 mm | 8 – 25 |
| Crank Radius | 75 mm | 50 – 100 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Trumpet Lyre Mount Main Body
A single 3D mechanical CAD part for a trumpet music lyre mount (Main Body with Paddle). Geometry details: 1. A 18mm-wide semi-cylindrical clamp arc for a 28mm diameter cylinder, w
Spur Gearbox
design gearbox
UAV Ogive Nose Cone
Design a watertight, 3D-printable aerodynamic nose cone module for a fixed-wing tactical UAV, optimized for printing in Carbon Fiber Filled PETG (PETG-CF). The base of the nose con