Gears and transmission
Gearbox Housing
- Bounding box
- 50 × 40 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 22
- Published
- November 22, 2026
Download
Free to download and use. See the terms.
The prompt
Rectangular gearbox housing, 50 mm long, 40 mm wide, 34 mm tall, 1.6 mm walls, open on one side. Internal cylindrical cavity 30 mm diameter, 20 mm deep, axis across the width. Two bearing seats on the width axis, 11 mm diameter and 3 mm deep, with 8 mm through-holes. Front wall has two 9 mm bearing seats, 3 mm deep, 12 mm apart, with 6 mm through-holes on a front-to-back axis. Six M2.5 pilot holes (2.2 mm) around the open side. Four 3.4 mm holes in the base.
Parameters
| Name | Value | Range |
|---|---|---|
| Body length X | 50 mm | 30 – 120 |
| Body width Y | 40 mm | 20 – 100 |
| Body height Z | 34 mm | 15 – 100 |
| Wall thickness | 1.6 mm | 1.2 – 5 |
| Vertical corner radius | 5 mm | 0 – 15 |
| Cavity diameter | 30 mm | 10 – 60 |
| Cavity depth along Y | 20 mm | 6 – 60 |
| Cavity axis height | 17 mm | 5 – 90 |
| Seat diameter | 11 mm | 5 – 24 |
| Seat depth | 3 mm | 1 – 8 |
| Through hole | 8 mm | 3 – 18 |
| Boss diameter | 22 mm | 10 – 36 |
| Seat diameter | 9 mm | 4 – 20 |
| Seat depth | 3 mm | 1 – 8 |
| Through hole | 6 mm | 2 – 14 |
| Seat spacing | 12 mm | 4 – 32 |
| Seat height | 17 mm | 5 – 90 |
| Cover pilot hole | 2.2 mm | 1.5 – 4 |
| Cover pilot depth | 9 mm | 3 – 20 |
| Base hole diameter | 3.4 mm | 2 – 8 |
| Base hole inset X | 9 mm | 3 – 20 |
| Base hole inset Y | 5 mm | 2 – 15 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
