3D preview of Gearbox base plate with meshed spur gears
Loading the interactive model…
Interactive 3D model of Gearbox base plate with meshed spur gears

Gears and transmission

Gearbox base plate with meshed spur gears

2 views
Bounding box
120 × 80 × 30 mm
Engine
3D Printing B-rep
Parameters
14
Published
November 18, 2026

Download

Free to download and use. See the terms.

The prompt

Create a rectangular gearbox base plate measuring 120 mm in length, 80 mm in width, and 5 mm in thickness, positioned flat on the XY plane. Extrude three vertical cylindrical shafts upward from the top face of the plate, each with a diameter of 8 mm and a height of 25 mm. Position the shafts along the central longitudinal axis of the plate at the following coordinates relative to the plate center (0,0): - Shaft 1 (Input): x = -26.5 mm, y = 0 mm - Shaft 2 (Idler): x = -8.5 mm, y = 0 mm - Shaft 3 (Output): x = 26.5 mm, y = 0 mm Generate three spur gears aligned with the respective shafts, using a module of 1.0 mm and a gear thickness of 8 mm, positioned 2 mm above the base plate surface: - Gear 1 (Input on Shaft 1): 16 teeth, with an 8 mm central bore hole. - Gear 2 (Idler on Shaft 2): 20 teeth, with an 8 mm central bore hole, meshed directly with Gear 1. - Gear 3 (Output on Shaft 3): 50 teeth, with an 8 mm central bore hole, meshed directly with Gear 2, ensuring the output rotation matches the input motor direction through the dual-stage reversal.

Parameters

NameValueRange
Length120 mm50 – 200
Width80 mm40 – 160
Thickness5 mm3 – 10
Shaft diameter8 mm4 – 20
Shaft height25 mm10 – 60
Input shaft X position-26.5 mm-60 – 60
Idler shaft X position-8.5 mm-60 – 60
Output shaft X position26.5 mm-60 – 60
Gear module1 mm0.5 – 3
Gear thickness8 mm3 – 20
Gap above plate2 mm0.5 – 6
Input gear teeth16 mm8 – 80
Idler gear teeth20 mm8 – 80
Output gear teeth50 mm20 – 120

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.