Gears and transmission
Gear Shift Knob Adapter Insert
- Bounding box
- 24 × 24.0 × 30 mm
- Engine
- 3D Printing B-rep
- Parameters
- 12
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a precise mechanical cylindrical adapter insert for an automotive gear shift knob. Base Geometry: Create a solid vertical cylinder with an outer diameter of [X mm] and a total height of [Y mm]. Central Bore: Create a central vertical blind hole (bore) with a diameter of 14.2 mm, starting from the bottom and stopping 2 mm before the top surface, leaving the top partially closed. Internal Locking Lip: Inside the 14.2 mm bore, add an internal retaining ring. This ring starts 2.5 mm below the top ceiling of the bore, has an inner diameter of 11.6 mm, and a vertical height of 2.5 mm. Apply a 1 mm, 45-degree chamfer to the bottom internal edge of this ring to act as a ramp. Anti-Rotation Keyway: At the top ceiling of the internal bore, extrude a rectangular block facing inwards towards the center. It must be 4.5 mm wide, protrude 1.5 mm into the bore cavity, and extend 8 mm downwards from the ceiling. Flex Cut: Create a 2 mm wide vertical rectangular cut entirely through one side of the outer cylinder wall, running the full height of the part from top to bottom. This stress-relief slit should turn the horizontal cross-section of the cylinder into a 'C' shape.
Parameters
| Name | Value | Range |
|---|---|---|
| Outer diameter | 24 mm | 18 – 40 |
| Total height | 30 mm | 20 – 60 |
| Central bore diameter | 14.2 mm | 10 – 18 |
| Top wall above bore | 2 mm | 1 – 5 |
| Locking lip inner diameter | 11.6 mm | 8 – 16 |
| Locking lip height | 2.5 mm | 1 – 6 |
| Lip top below bore ceiling | 2.5 mm | 0.5 – 8 |
| Lip bottom inner chamfer | 1 mm | 0.2 – 2 |
| Key tangential width | 4.5 mm | 2 – 10 |
| Key inward protrusion | 1.5 mm | 0.5 – 4 |
| Key downward height | 8 mm | 2 – 20 |
| Flex cut width | 2 mm | 0.8 – 5 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
