Gears and transmission
Gear Drive Base Plate
- Bounding box
- 165 × 90 × 93 mm
- Engine
- 3D Printing B-rep
- Parameters
- 21
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Simplify the base plate to a clean, solid rectangle measuring 165 mm wide by 90 mm deep. Ensure the two gear pivots are centered symmetrically along the middle width axis, and place a single, clean row of seven 4.5 mm mounting holes along the rear edge."
Parameters
| Name | Value | Range |
|---|---|---|
| Plate width | 165 mm | 60 – 300 |
| Plate depth | 90 mm | 40 – 200 |
| Plate thickness | 5 mm | 2 – 12 |
| Corner radius | 6 mm | 0 – 25 |
| Gear module | 3 mm | 1 – 6 |
| Teeth per gear | 18 mm | 8 – 48 |
| Gear thickness | 5 mm | 2 – 12 |
| Pivot pin diameter | 8 mm | 4 – 16 |
| Pivot pin height above plate | 7 mm | 2 – 20 |
| Mounting hole diameter | 4.5 mm | 2 – 8 |
| Number of rear mounting holes | 7 mm | 1 – 15 |
| Hole distance from rear edge | 8 mm | 4 – 30 |
| Margin at each end of hole row | 22.5 mm | 5 – 70 |
| Arm thickness | 8 mm | 3 – 20 |
| Arm bar width | 14 mm | 6 – 30 |
| Vertical rise of arm | 45 mm | 20 – 120 |
| Bend offset | 14 mm | 0 – 60 |
| Head radius | 11 mm | 6 – 25 |
| Head hole diameter | 4.5 mm | 2 – 10 |
| Slot width | 5.5 mm | 3 – 12 |
| Slot length | 22 mm | 0 – 60 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
