Everything else
Fuselage Frames with 8 Stringers
- Bounding box
- 139.0 × 90.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 22
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
Keep all 5 existing fuselage frames unchanged. Add exactly 8 straight longitudinal stringers connecting F1 to F5. Stringers are 2.5 mm square. Place them symmetrically: 2 along the lower corners, 2 halfway up the side walls, 2 at the upper shoulder corners, 2 along the upper fuselage. Each stringer must touch and join every frame. Do not add spars, braces, skin or other geometry. Do not change the frame shapes.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Thickness (X) | 2 mm | 1 – 6 |
| Structural Rim Width | 3 mm | 1 – 8 |
| Bottom Flat Ratio | 0.45 - | 0.2 – 0.7 |
| Upper Taper Angle | 10 deg | 0 – 30 |
| Upper Corner Radius | 8 mm | 1 – 25 |
| Top Crown Ratio | 0.06 - | 0.01 – 0.2 |
| F1 X Position | 0 mm | -50 – 50 |
| F2 X Position | 34 mm | 0 – 80 |
| F3 X Position | 68 mm | 20 – 120 |
| F4 X Position | 102 mm | 50 – 160 |
| F5 X Position | 135 mm | 80 – 200 |
| F1 Width | 76 mm | 30 – 140 |
| F1 Height | 67 mm | 30 – 130 |
| F2 Width | 84 mm | 30 – 140 |
| F2 Height | 72 mm | 30 – 130 |
| F3 Width | 90 mm | 30 – 140 |
| F3 Height | 75 mm | 30 – 130 |
| F4 Width | 86 mm | 30 – 140 |
| F4 Height | 72 mm | 30 – 130 |
| F5 Width | 78 mm | 30 – 140 |
| F5 Height | 67 mm | 30 – 130 |
| Stringer Cross-Section | 2.5 mm | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like