Everything else
Fuselage Frame Assembly with Wing Spars
- Bounding box
- 485.0 × 220.0 × 125.0 mm
- Engine
- Precision B-rep
- Parameters
- 30
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
Add one main wing spar through the centre frame F3. Spar is horizontal and perpendicular to the fuselage centreline. Cross-section 8 mm high × 4 mm thick. Extend 35 mm beyond each side of the fuselage. Add one rear spar 25 mm behind it, 6 mm high × 3 mm thick, extending 25 mm beyond each side. Keep all existing frames and stringers unchanged.
Parameters
| Name | Value | Range |
|---|---|---|
| Frame Thickness | 3 mm | 1 – 10 |
| Rim Width (wall) | 6 mm | 2 – 20 |
| Bottom Flat Ratio | 0.35 ratio | 0.1 – 0.8 |
| Upper Side Taper Angle | 12 deg | 0 – 30 |
| Upper Corner Radius | 8 mm | 1 – 30 |
| Crown Rise Ratio | 0.1 ratio | 0.02 – 0.25 |
| Stringer Size (square) | 2.5 mm | 1 – 8 |
| F1 Station X | -240 mm | -600 – 0 |
| F2 Station X | -120 mm | -600 – 0 |
| F3 Station X (centre) | 0 mm | -300 – 300 |
| F4 Station X | 120 mm | 0 – 600 |
| F5 Station X | 240 mm | 0 – 600 |
| F1 Width | 100 mm | 40 – 300 |
| F1 Height | 95 mm | 40 – 300 |
| F2 Width | 135 mm | 40 – 320 |
| F2 Height | 115 mm | 40 – 320 |
| F3 Width | 150 mm | 40 – 340 |
| F3 Height | 125 mm | 40 – 340 |
| F4 Width | 140 mm | 40 – 320 |
| F4 Height | 118 mm | 40 – 320 |
| F5 Width | 115 mm | 40 – 300 |
| F5 Height | 100 mm | 40 – 300 |
| Main Spar Height | 8 mm | 3 – 30 |
| Main Spar Thickness | 4 mm | 1 – 20 |
| Main Spar Overhang (per side) | 35 mm | 5 – 150 |
| Spar Height on F3 | 0.5 ratio | 0.2 – 0.8 |
| Rear Spar Offset Aft | 25 mm | 5 – 150 |
| Rear Spar Height | 6 mm | 2 – 25 |
| Rear Spar Thickness | 3 mm | 1 – 15 |
| Rear Spar Overhang (per side) | 25 mm | 3 – 120 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like