Plates and panels
Frame Drone 5 inch Stretched (1503 3 Baut, FC 30.5, Spacer)
- Bounding box
- 196.8 × 179.8 × 34 mm
- Engine
- 3D Printing B-rep
- Parameters
- 19
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
Frame drone 5 inch stretched X persegi panjang, motor 1503 pola 3 baut, arm tanpa lubang, FC 30.5, plate atas bawah dipisah spacer
Parameters
| Name | Value | Range |
|---|---|---|
| Jarak motor depan-belakang dari tengah | 84 mm | 70 – 100 |
| Jarak motor kiri-kanan dari tengah | 76 mm | 60 – 95 |
| Posisi pangkal arm (X) | 34 mm | 20 – 50 |
| Posisi pangkal arm (Y) | 10 mm | 4 – 16 |
| Tebal arm / bottom plate | 5 mm | 4 – 6 |
| Lebar arm di pangkal | 18 mm | 14 – 24 |
| Lebar arm di ujung | 10 mm | 8 – 14 |
| Diameter dudukan motor | 22 mm | 20 – 28 |
| Diameter lingkaran 3 baut motor 1503 | 9 mm | 8 – 12 |
| Diameter lubang baut motor M2 | 2.4 mm | 2 – 3.2 |
| Lubang tengah motor | 5.5 mm | 4 – 7 |
| Panjang body | 150 mm | 120 – 170 |
| Lebar body, persegi panjang | 38 mm | 36 – 46 |
| Jarak antar plate / tinggi spacer | 25 mm | 20 – 35 |
| Tebal top plate | 4 mm | 3 – 5 |
| Diameter luar spacer | 6.5 mm | 6 – 9 |
| Lebar slot strap baterai | 20 mm | 12 – 25 |
| Jendela kamera FPV | 21 mm | 18 – 26 |
| Lebar slot XT60 | 16.5 mm | 12 – 20 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four