Plates and panels
Foldable Emergency Rescue Stretcher
- Bounding box
- 2400 × 578 × 40 mm
- Engine
- 3D Printing B-rep
- Parameters
- 23
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Create an editable 3D CAD model of a foldable rescue stretcher (2100 × 550 mm). Use two parallel silver aluminum tube rails, a taut orange Oxford fabric bed, and four LONG black rubber handles extending clearly beyond the frame ends (150 mm each). Split both side rails at the exact midpoint and connect them with robust, realistic metal pivot hinges, aligned hinge plates, visible pivot pins, and positive locking sleeves that lock the rails straight when unfolded. Make the hinges functional-looking and structurally connected. IMPORTANT: remove the fabric bed completely from the central hinge area; leave a clear gap around both hinges so fabric cannot obstruct folding or locking. Secure the fabric separately to each rail section with reinforced edges. Add two orange patient restraint straps with black quick-release buckles. No crossbars, wheels, or legs. Show the stretcher fully unfolded and locked, with realistic proportions and separate editable components.
Parameters
| Name | Value | Range |
|---|---|---|
| Single rail segment length | 1050 mm | 500 – 2000 |
| Width over handle outer edges | 550 mm | 300 – 800 |
| Rail tube diameter | 32 mm | 16 – 60 |
| Handle grip diameter | 38 mm | 20 – 80 |
| Handle protrusion length | 150 mm | 80 – 200 |
| Handle overlap onto rail | 50 mm | 20 – 100 |
| Hinge length along rail | 120 mm | 60 – 200 |
| Hinge width across rail | 50 mm | 30 – 100 |
| Hinge stack height | 24 mm | 15 – 50 |
| Hinge leaf plate thickness | 8 mm | 4 – 20 |
| Hinge pivot pin diameter | 12 mm | 6 – 30 |
| Locking sleeve length along rail | 160 mm | 80 – 240 |
| Locking sleeve wall thickness | 6 mm | 3 – 12 |
| Bed fabric width | 520 mm | 300 – 800 |
| Fabric sheet thickness | 2 mm | 1 – 8 |
| Bed fabric setback from rail ends | 50 mm | 0 – 200 |
| Clear gap in fabric at central hinge | 240 mm | 120 – 400 |
| Restraint strap width | 50 mm | 20 – 100 |
| Restraint strap thickness | 3 mm | 1 – 8 |
| Restraint strap length | 550 mm | 200 – 1000 |
| Buckle width across strap | 70 mm | 30 – 120 |
| Buckle length along strap | 50 mm | 20 – 100 |
| Buckle thickness | 15 mm | 5 – 40 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Encapsulation Machine Frame with Acrylic Panels
has esto con paneles de acrilico