FLUF ONE Recovery Slide

Create a single RIGHT-FOOT unisex recovery slide sandal called FLUF ONE as a clean watertight organic mesh for an EVA foam prototype and 3D printing. CORE FORM - One-piece moulded recovery slide: open toe, open heel, one wide continuous midfoot strap, deep anatomical foot cradle and a thick cloud-like platform sole. - UK size 8 reference. Overall length 292 mm. Maximum forefoot width 116 mm. Heel width 84 mm. - Soft premium silhouette: rounded rectangular toe, gently tapered waist, rounded heel, no sharp corners. - Overall stance must look stable and grounded, not narrow, bulbous or cartoon-like. SOLE + FOOTBED - Heel stack height 42 mm; forefoot stack 30 mm. - Gentle rocker: toe rises 18 mm and heel rises 7 mm from the ground plane. - Deep heel cup 12 mm with a smooth 6 mm rim. - Subtle medial arch support rising 8 mm from the footbed. - Footbed length 280 mm with broad forefoot room; smooth concave transitions. - Broad flat ground-contact zone with a slight outsole flare of 4 mm around the perimeter. - Two soft horizontal sculpted bands around the outer sidewall, matching FLUF's layered cloud sole. - Bottom traction should use large shallow rounded wave/chevron channels, 2 mm deep, with no tiny tread details. STRAP - One integrated broad strap positioned over the midfoot, 94 mm long in the heel-to-toe direction. - Strap thickness 8 mm, soft rounded edges with 7 mm fillets. - Maximum internal clearance from footbed to strap underside about 56 mm, with a forgiving high-instep profile. - Strap joins the sole with wide smooth radiused transitions; no thin pinch points. - Add a subtle recessed “FLUF.” wordmark on the OUTER lateral strap face, approximately 32 mm wide and 0.8 mm deep. If reliable lettering is not possible, leave a smooth recessed logo panel instead. DESIGN + BUILD QUALITY - Minimal premium European product design; monolithic, calm and tactile. - Symmetric-looking from the front while retaining right-foot anatomy. - Minimum structural thickness 6 mm everywhere. - Use broad continuous curvature and smooth tangent transitions. - Keep the topology clean, manifold, watertight and printable. - Model only the slide: no foot, sock, person, floor, background, display stand or second shoe. - Do not add buckles, separate straps, toe posts, laces, ventilation holes, exaggerated arch bumps, spikes or decorative cut-outs. - Do not model fine pebble texture; keep surfaces smooth for CAD and prototype inspection. Present the finished slide at a three-quarter isometric angle with the entire object visible.

Parameters

This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.