Everything else
Five Hollow Fuselage Frames
- Bounding box
- 137.0 × 90.0 × 75.0 mm
- Engine
- Precision B-rep
- Parameters
- 21
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
Create ONLY five hollow transverse fuselage frames along a 135 mm horizontal centreline. Do not add stringers or spars yet. Frame positions and outside dimensions: F1: x=0 mm, width 76 mm, height 67 mm F2: x=34 mm, width 84 mm, height 72 mm F3: x=68 mm, width 90 mm, height 75 mm F4: x=102 mm, width 86 mm, height 72 mm F5: x=135 mm, width 78 mm, height 67 mm Each frame is 2 mm thick in the longitudinal direction and has a 3 mm wide structural rim. Do NOT make the frames circular or elliptical. Cross-section shape: flat horizontal underside approximately 45% of total width; lower corners angled outward at approximately 45 degrees; lower side walls nearly vertical; upper sides taper inward approximately 10 degrees; upper corners rounded; top approximately flat with a shallow curve. Centre every frame on the same longitudinal axis. Keep the inside completely open. Create only these five frames.
Parameters
| Name | Value | Range |
|---|---|---|
| F1 longitudinal position (X) | 0 mm | -100 – 300 |
| F2 longitudinal position (X) | 34 mm | -100 – 300 |
| F3 longitudinal position (X) | 68 mm | -100 – 300 |
| F4 longitudinal position (X) | 102 mm | -100 – 300 |
| F5 longitudinal position (X) | 135 mm | -100 – 300 |
| F1 outside width | 76 mm | 30 – 150 |
| F1 outside height | 67 mm | 30 – 150 |
| F2 outside width | 84 mm | 30 – 150 |
| F2 outside height | 72 mm | 30 – 150 |
| F3 outside width | 90 mm | 30 – 150 |
| F3 outside height | 75 mm | 30 – 150 |
| F4 outside width | 86 mm | 30 – 150 |
| F4 outside height | 72 mm | 30 – 150 |
| F5 outside width | 78 mm | 30 – 150 |
| F5 outside height | 67 mm | 30 – 150 |
| Longitudinal thickness | 2 mm | 0.5 – 8 |
| Structural rim width | 3 mm | 0.8 – 8 |
| Flat underside / width | 0.45 ratio | 0.1 – 0.85 |
| Upper side inward taper | 10 deg | 0 – 30 |
| Upper corner radius | 5 mm | 1 – 20 |
| Top crown rise / height | 0.03 ratio | 0.005 – 0.12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like