Plates and panels
Filleted Plate with 4x M1.5 Corner Holes
- Bounding box
- 50.0 × 25.0 × 5.0 mm
- Engine
- Precision B-rep
- Parameters
- 5
- Published
- November 5, 2026
Download
Free to download and use. See the terms.
The prompt
create a plate with length 50mm, width 25mm and thickness 5mm. make all the four edges of the plate filleted with radius of 4mm. Then finally create four through all M 1.5 mm holes in each corner with fillet center as hole center.
Parameters
| Name | Value | Range |
|---|---|---|
| Plate Length | 50 mm | 20 – 150 |
| Plate Width | 25 mm | 15 – 100 |
| Plate Thickness | 5 mm | 2 – 20 |
| Corner Fillet Radius | 4 mm | 0.5 – 8 |
| Corner Hole Diameter (M1.5 clearance) | 1.7 mm | 0.8 – 4 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Enclosure with Camera Lens & Sun Visor
On the orange front faceplate piece, cut a 15mm circular hole centered horizontally in the upper third section for a camera lens aperture. Directly above this circular hole, projec
Foldable Emergency Rescue Stretcher
Create an editable 3D CAD model of a foldable emergency rescue stretcher matching the reference image. Dimensions: 2100 × 550 mm. Use two parallel silver aluminum tube rails, four