Organic and sculpted
F450 Survey Quadcopter
- Bounding box
- 120.0 × 16.7 × 120.0 mm
- Engine
- Organic B-rep
- Parameters
- 0
- Published
- November 17, 2026
Download
Free to download and use. See the terms.
The prompt
create a quadcopter of frame F450 using flight controller Radiolink v1.1 and down side of drone there is a raspberry pi 5 connected with rgb camera, thermal camera, lidar, and environmental sensor.components details are Flight Controller RGB camera Model RadioLink CrossFlight v1.1 Raspberry Pi Camera Module 3 Primary purpose Stable, autonomous, and precise navigation Interface Person/scene/object detection, mapping evidence Thermal LiDAR 7Semi MLX90640 IR Thermal Camera (SKU: ES-12142) Benewake TFmini-S Thermal anomaly / warm-object cue / fire-supporting evidence Short-range distance and obstacle cue MIPI CSI-2 I²C UART or I²C Environmental 7Semi BME688 Environmental Sensor (ES-12123) Temperature, humidity, pressure and environmental context I²C / sensor-specific GPS RadioLink M10N GPS SE100 Module Position and time reference CrossFlight GPS/I²C
Parameters
This model was generated without adjustable parameters. Open it in the editor to add your own dimensions.
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →BioBuzz FTC Robot
I need a realistic model made for this years First Tech challenge 2026 BioBuzz competition. I need to create an intake system for the robot. I need a Main robot chassis, left/right
Push-Button Ratchet Mechanism
Create a simple 3D-printable push-button ratchet mechanism. Pressing a button once should rotate a circular wheel by exactly 30 degrees, then lock it in that position. Releasing th
Stable Monitoring Buoy
Design a simple, robust, 3D-printable floating buoy for an autonomous environmental monitoring system. PRIORITY #1: IT MUST FLOAT STABLY IN WATER WITH THE ELECTRONICS AND SENSORS
Scale Truss Bridge
Act as a structural design engineer. Create a 3D solid CAD model of a scale Warren/Pratt truss bridge in millimeters. Units: Millimeters (mm) Overall Dimensions: - Bridge Span (L
Eyeglass Frame (SDF)
Create a **fully parametric, engineering-grade 3D CAD model** of a modern rectangular eyeglass frame optimized for **FDM 3D printing**, with **all components printable separately a
Rectangular Box
create a simple rectangular box with exact dimensions.
