Everything else
F-4 Phantom Centre Fuselage Skeleton
- Bounding box
- 139.0 × 160.0 × 77.0 mm
- Engine
- Precision B-rep
- Parameters
- 37
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model. Keep the 5 formers and longitudinal stringers. Change the fuselage cross-section from oval/cylindrical to an F-4 Phantom II centre fuselage shape. Make the lower fuselage wider and flatter, with straighter vertical sides and a flatter underside. Narrow the upper fuselage slightly. Add two large rectangular wing spar beams passing horizontally through the centre section. Keep the structure open with no outer skin. Do not add wings yet.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 135 mm | 60 – 260 |
| Max Width (lower) | 90 mm | 40 – 170 |
| Overall Height | 75 mm | 40 – 150 |
| Upper Deck Width | 64 mm | 30 – 130 |
| Lower Corner Chamfer | 8 mm | 0 – 20 |
| Upper Corner Chamfer | 8 mm | 0 – 20 |
| Top of Straight Side | 0 mm | -20 – 24 |
| Former Count | 5 pcs | 2 – 12 |
| Former Thickness | 2 mm | 1.5 – 6 |
| Structural Rim Width | 3 mm | 1.8 – 10 |
| Stringer Size (square) | 2.5 mm | 1.8 – 6 |
| Stringer Count | 8 pcs | 3 – 16 |
| Top Spine Width | 4 mm | 2 – 14 |
| Top Spine Height | 3 mm | 1.8 – 12 |
| Wing Spar Beam Width (chord) | 6 mm | 2 – 20 |
| Wing Spar Beam Height | 10 mm | 2 – 30 |
| Wing Spar Beam Extension / side | 25 mm | 5 – 90 |
| Beam 1 Station (X) | 48 mm | 5 – 130 |
| Beam 1 Height (Z) | 10 mm | -35 – 35 |
| Beam 2 Station (X) | 62 mm | 5 – 130 |
| Beam 2 Height (Z) | -26 mm | -35 – 35 |
| Main Wing Spar Width | 4 mm | 1.8 – 16 |
| Main Wing Spar Height | 8 mm | 1.8 – 22 |
| Main Spar Extension / side | 35 mm | 5 – 100 |
| Main Spar Station (X) | 30 mm | 5 – 130 |
| Main Spar Height (Z) | -33 mm | -35 – 35 |
| Rear Spar Width | 3 mm | 1.8 – 16 |
| Rear Spar Height | 6 mm | 1.8 – 22 |
| Rear Spar Extension / side | 25 mm | 5 – 100 |
| Rear Spar Station (X) | 100 mm | 5 – 130 |
| Rear Spar Height (Z) | -33 mm | -35 – 35 |
| Engine Bore Diameter | 24 mm | 8 – 60 |
| Engine Bore Offset (Y) | 18 mm | 0 – 45 |
| Engine Bore Offset (Z) | -8 mm | -35 – 35 |
| Join Pin Diameter | 4 mm | 2 – 10 |
| Join Pin Length | 4 mm | 2 – 15 |
| Join Pin Count | 3 pcs | 1 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like