Everything else
F-4 Phantom Centre-Fuselage Frame (Open, Tapered)
- Bounding box
- 332.3 × 104.0 × 53.0 mm
- Engine
- Precision B-rep
- Parameters
- 35
- Published
- September 12, 2026
Download
Free to download and use. See the terms.
The prompt
Modify the existing model. Keep the current open-frame structure. Make the fuselage widest through the middle wing-root area and slightly narrower at the front and rear. Flatten the underside further. Make the upper fuselage narrower than the lower fuselage. Replace the irregular internal braces with one straight main wing spar passing horizontally through the fuselage and one smaller rear spar behind it. Keep all formers aligned perpendicular to the fuselage centreline. Do not add outer skin.
Parameters
| Name | Value | Range |
|---|---|---|
| Fuselage Length | 320 mm | 120 – 600 |
| Max Width (Widest Point) | 44 mm | 20 – 120 |
| Body Height | 48 mm | 20 – 120 |
| Lower Fuselage Width | 42 mm | 12 – 120 |
| Upper Fuselage Width | 24 mm | 12 – 120 |
| Belly Corner Chamfer | 5 mm | 0.5 – 20 |
| Top Corner Chamfer | 6 mm | 0.5 – 20 |
| Height of Widest Point | -10 mm | -60 – 20 |
| Wing-Root Station (frac of length) | 0.42 | 0.15 – 0.85 |
| Nose Width Scale | 0.75 | 0.4 – 1 |
| Tail Width Scale | 0.85 | 0.4 – 1 |
| Former Count | 5 | 2 – 12 |
| Former Thickness | 4 mm | 1 – 20 |
| Former Rim / Wall Width | 4 mm | 1 – 15 |
| Stringer Count | 6 | 2 – 16 |
| Stringer Size | 2 mm | 0.5 – 10 |
| Stringer Faceting Segments | 12 | 4 – 48 |
| Top Spine Width | 10 mm | 2 – 40 |
| Top Spine Height | 6 mm | 2 – 30 |
| Main Spar Chord | 14 mm | 2 – 60 |
| Main Spar Depth | 34 mm | 2 – 120 |
| Main Spar Span Extension | 30 mm | 0 – 200 |
| Main Spar X Position | 130 mm | 5 – 600 |
| Main Spar Z Position | 0 mm | -60 – 60 |
| Rear Spar Chord | 8 mm | 2 – 60 |
| Rear Spar Depth | 20 mm | 2 – 120 |
| Rear Spar Span Extension | 20 mm | 0 – 200 |
| Rear Spar X Position | 200 mm | 5 – 600 |
| Rear Spar Z Position | 0 mm | -60 – 60 |
| Engine Duct Diameter | 16 mm | 2 – 60 |
| Engine Duct Y Offset | 13 mm | 0 – 60 |
| Engine Duct Z Offset | -12 mm | -60 – 60 |
| Alignment Pin Diameter | 4 mm | 0.5 – 20 |
| Alignment Pin Length | 12 mm | 1 – 60 |
| Alignment Pin Count | 3 | 0 – 6 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Table
Make a table of height 45 cm
旋转式卷烟陈列架
物件名称： 旋转式卷烟陈列架（带语音播报） 整体形态： 一个圆柱形、可360度旋转的立式展示架。 整体高度为1380mm，直径为600mm。 底部配有4个带刹车的万向轮，方便移动和固定。 结构分层（从下往上）： 底座（0-200mm高度）： 底部为圆柱形底座，高200mm。 外层采用网格状设计（类似金属网孔或菱形网格）。 底座内部中空，用于内置音箱设备。
Haul‑off Reel
Make this haul off reel, the dimensions of it should be a 2 meter diameter circle shaper with 0.7 meter width, i have attached a picture of what it looks like