Plates and panels
External Wall Panel
- Bounding box
- 3000.0 × 100.0 × 1000.0 mm
- Engine
- Precision B-rep
- Parameters
- 3
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
External Walls As BHP drawing 24080-BHP-00-00-DR-A-5250-T01 - WALL TYPES - GROUND FLOOR; fire rating requirements in accordance with 24080-BHP-00-00-DR-A-5240-T01 - FIRE STRATEGY - GROUND FLOOR; in accordance with architectural specification; include for secondary steelwork / carrier system as required External Wall Type (EW); 100mm thick Trimo Trimoterm FTV External Wall Panels laid horizontally and fixed directly to steel frame (in accordance with structural engineer's design) utilising Trimo fast levelling substructure (75mm offset allowance cladding face to face of steel). Colours in accordance with Elevations drawings; generally external colour: Metallic Silver RAL 9006, internal colour: Prefinished White RAL 9010).
Parameters
| Name | Value | Range |
|---|---|---|
| Width (horizontal) | 3000 mm | 500 – 6000 |
| Height (vertical) | 1000 mm | 200 – 2000 |
| Thickness | 100 mm | 50 – 150 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,