Plates and panels
Exploded Wooden Bird Feeder (11 parts)
- Bounding box
- 2470.0 × 300.0 × 200.0 mm
- Engine
- Precision B-rep
- Parameters
- 16
- Published
- September 21, 2026
Download
Free to download and use. See the terms.
The prompt
Create a parametric 3D CAD model of an open wooden bird feeder. The model must consist of the following separate parts assembled together: 1. Base: A rectangular flat board with dimensions 350mm x 300mm and a thickness of 20mm. 2. Side safety rails: 4 small rectangular strips attached to the edges of the base, with a height of 30mm and thickness of 10mm, to prevent bird seeds from falling out. 3. Support posts: 4 vertical square columns located at the 4 corners of the base. Each post has a cross-section of 30mm x 30mm and a height of 200mm. The top surface of each post must be mitered (cut) at a 45-degree angle to match the roof slope. 4. Gabled roof: A two-sided pitched roof with a 45-degree slope angle relative to the horizontal base. The two roof panels meet at the top ridge forming a 90-degree apex angle. The roof must overhang the base, with a total length of 400mm. Panel A dimensions: 400mm x 220mm x 20mm. Panel B dimensions: 400mm x 240mm x 20mm (overlapping Panel A at the ridge). The final output should be a clean geometric assembly, suitable for export to STEP or STL format, with realistic wood component thicknesses and sharp technical edges.
Parameters
| Name | Value | Range |
|---|---|---|
| Base Length (X) | 350 mm | 200 – 600 |
| Base Width (Y) | 300 mm | 150 – 500 |
| Base Thickness | 20 mm | 6 – 40 |
| Front/Rear Rail Length | 290 mm | 100 – 500 |
| Left/Right Rail Length | 240 mm | 80 – 400 |
| Rail Thickness | 10 mm | 4 – 25 |
| Rail Height | 30 mm | 10 – 80 |
| Post Cross Section | 30 mm | 15 – 60 |
| Post Height (tall side) | 200 mm | 80 – 400 |
| Post Top Miter Angle | 45 deg | 10 – 80 |
| Roof Panel Length | 400 mm | 200 – 700 |
| Roof Panel A Width | 220 mm | 80 – 400 |
| Roof Panel B Width | 240 mm | 80 – 400 |
| Roof Panel Thickness | 20 mm | 6 – 40 |
| Roof Pitch Angle | 45 deg | 15 – 70 |
| Exploded Layout Gap | 60 mm | 10 – 200 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service