3D preview of Exploded Motor-Driven Rotating Lever Mechanism
Loading the interactive model…
Interactive 3D model of Exploded Motor-Driven Rotating Lever Mechanism

Gears and transmission

Exploded Motor-Driven Rotating Lever Mechanism

1 views
Bounding box
1247.8 × 56.8 × 30 mm
Engine
3D Printing B-rep
Parameters
50
Published
November 19, 2026

Download

Free to download and use. See the terms.

The prompt

Create a 3D mechanical assembly of a motor-driven rotating lever mechanism. **Design requirements:** - A straight lever (rack-like arm) with a length of exactly 80 mm. - The lever rotates around a fixed pivot axis at one end, like a clock hand. - The initial angular position of the lever is 270°. - The lever rotates counterclockwise from 270° to 360° (0°), giving a total angular displacement of 90°. - Use a small electric motor mounted to a rigid base. - The motor shaft drives a small pinion gear. - The pinion gear drives a sector gear attached to the lever's pivot shaft, causing the lever to rotate. - The lever must be rigidly connected to the sector gear and rotate together with it. - Include a fixed mounting base, motor mounting holes, pivot shaft, bearings or bearing supports, and gear supports. - The mechanism must be mechanically realistic, with gears properly meshing and enough clearance to avoid collisions. - The lever must be able to move freely through its full 90° range without hitting the base, motor, or other components. - Use a compact and simple design suitable for prototyping and 3D printing. **Motion requirement:** Show the lever in its initial position at 270° and its final position at 360°. The pivot remains fixed, and only the lever and sector gear rotate. Generate the complete assembly with separate mechanical components and a clear view of how the motor, pinion, sector gear, and 80 mm lever are connected.

Parameters

NameValueRange
Exploded spacing along X120 mm80 – 200
Base length90 mm60 – 120
Base width55 mm40 – 80
Base plate thickness6 mm4 – 12
Base corner radius4 mm0 – 10
Motor boss diameter8 mm5 – 15
Motor boss height4 mm1 – 10
Motor M3 hole spacing15 mm8 – 30
Motor screw clearance3.4 mm2.5 – 5
Pivot support width16 mm10 – 25
Pivot support height16 mm8 – 25
Bearing support spacing along Y30 mm15 – 50
Motor width20 mm12 – 40
Motor depth20 mm12 – 40
Motor height30 mm15 – 60
Motor shaft diameter3 mm2 – 6
Motor shaft length8 mm3 – 15
Pinion outside diameter10 mm6 – 20
Pinion tooth count12 mm8 – 40
Pinion bore3 mm1 – 8
Pinion face width4 mm2 – 10
Sector pitch radius36 mm20 – 60
Sector tooth count on sector24 mm12 – 48
Sector face width5 mm2 – 10
Sector bore5 mm2 – 12
Sector angular span100 deg90 – 110
Sector hub diameter16 mm8 – 30
Sector hub height8 mm4 – 15
Pivot shaft diameter5 mm3 – 10
Pivot shaft length25 mm15 – 40
Shaft collar diameter9 mm6 – 15
Shaft collar thickness3 mm1 – 8
Bearing outside diameter12 mm8 – 25
Bearing bore5 mm2 – 10
Bearing width5 mm3 – 12
Bearing flange diameter16 mm10 – 30
Bearing flange thickness1.5 mm0.8 – 4
Lever length80 mm40 – 120
Lever width6 mm3 – 15
Lever thickness4 mm2 – 10
Lever hub diameter16 mm8 – 30
Lever hub height8 mm4 – 15
Lever hub bore5 mm2 – 10
Screw shank diameter3 mm2 – 6
Screw head diameter5.5 mm4 – 10
Screw head height2 mm1 – 5
Motor screw length8 mm4 – 15
Clamp screw length6 mm3 – 12
Washer OD7 mm4 – 12
Washer thickness1 mm0.5 – 3

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.

Exploded Motor-Driven Rotating Lever Mechanism - Free CAD Model (STEP, STL) | TextoCAD