Gears and transmission
ErgoGlide Seat Height Mechanism (Exploded)
- Bounding box
- 5496.8 × 300 × 251.1 mm
- Engine
- 3D Printing B-rep
- Parameters
- 40
- Published
- November 18, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a complete, realistic 3D CAD assembly of **ErgoGlide**, an automated scooter seat-height adjustment mechanism. Use a dual four-bar linkage system with mirrored linkages on both sides, connected by a rigid seat support platform. **Specifications:** - Link length: 135 mm - Subframe inclination: 10° - Linkage operating range: 18°–66° - Seat height: 735–817 mm - Vertical movement: 81.6 mm - Rearward movement: 73.5 mm - Actuator: 12V DC worm gear motor with Tr12×3 lead screw - Position feedback: AS5600 encoder Include the scooter rear subframe, seat, storage compartment, four linkage arms, pivot shafts, bearings, lead screw, travelling nut, motor, mounting brackets and mechanical end stops. Show three configurations: LOW (18°), MID (42°) and HIGH (66°). The seat must move upwards and rearwards while maintaining stability. Package the mechanism around the under-seat storage compartment, preserving maximum storage volume. Generate a fully assembled, mechanically connected and editable 3D CAD model with realistic automotive components. Include isometric, side, top, exploded and transparent cutaway views. Ensure realistic pivot geometry, synchronised linkages, actuator clearance and collision-free movement. Calculate missing dimensions where necessary and identify assumptions. **Prioritise mechanical feasibility, functional movement and manufacturability over visual aesthetics.**
Parameters
| Name | Value | Range |
|---|---|---|
| Spacing between part origins along X | 480 mm | 300 – 800 |
| Subframe length | 420 mm | 300 – 520 |
| Subframe width | 260 mm | 180 – 340 |
| Subframe height | 180 mm | 120 – 260 |
| Subframe inclination | 10 deg | 0 – 20 |
| Box length | 300 mm | 200 – 380 |
| Box width | 220 mm | 140 – 300 |
| Box height | 140 mm | 80 – 200 |
| Box wall thickness | 3 mm | 2 – 6 |
| Saddle length | 420 mm | 280 – 520 |
| Saddle width | 300 mm | 200 – 400 |
| Saddle height | 80 mm | 40 – 140 |
| Platform length | 340 mm | 240 – 440 |
| Platform width | 260 mm | 160 – 360 |
| Platform plate thickness | 8 mm | 4 – 16 |
| Link centre distance | 135 mm | 90 – 200 |
| Link body width | 20 mm | 10 – 40 |
| Link body thickness | 12 mm | 6 – 24 |
| Link pivot bore | 12.2 mm | 6 – 20 |
| Shaft diameter | 12 mm | 6 – 20 |
| Longest pivot shaft | 260 mm | 50 – 300 |
| Bushing bore | 12 mm | 6 – 20 |
| Bushing body OD | 18 mm | 10 – 30 |
| Bushing length | 16 mm | 6 – 30 |
| Bushing flange diameter | 24 mm | 12 – 40 |
| Bushing flange thickness | 3 mm | 1 – 8 |
| Screw length | 300 mm | 150 – 400 |
| Screw nominal diameter | 12 mm | 8 – 24 |
| Screw pitch | 3 mm | 1 – 8 |
| Nut block length | 40 mm | 20 – 70 |
| Nut block width | 35 mm | 20 – 60 |
| Nut block height | 30 mm | 15 – 60 |
| Motor overall length | 90 mm | 60 – 140 |
| Motor width | 70 mm | 40 – 110 |
| Motor height | 50 mm | 30 – 90 |
| Encoder PCB length | 20 mm | 10 – 40 |
| Encoder PCB width | 15 mm | 8 – 30 |
| Encoder PCB thickness | 1.6 mm | 1 – 3 |
| Magnet diameter | 6 mm | 3 – 12 |
| Magnet height | 3 mm | 1 – 8 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Spur Gearbox
design gearbox
Involute Spur Gear with Keyway
Precision Involute Spur Gear with Hub and Keyway: Module (m) of 2.0 mm, 40 teeth (z), Pitch Circle Diameter (d) of 80.00 mm, 20° pressure angle (\alpha), 15.00 mm face width (b), a
Parametric Helical Gear
Create a parametric helical gear with the following specifications: 32 teeth, normal module of 3 mm, right-hand helix, total face width of 80 mm, and a central bore hole with a dia
Rod with Spur Gear
Metal rod diameter is 20 mm and length is 100 mm and right side attach a gear and their OD is 50 mm
Spur Gear (12 Teeth)
Built a gear with 12 teeth
Meat Grinder Middle Gear
This is the middle gear of the meat grinder: large wheel Ø68 (78 teeth, helical tooth to the right), spur gear Ø20 (8 teeth), hole Ø8, total height 32 mm.
