Plates and panels
Enclosure Front & Rear Panels
- Bounding box
- 110.0 × 72.0 × 4.0 mm
- Engine
- Precision B-rep
- Parameters
- 13
- Published
- September 29, 2026
Download
Free to download and use. See the terms.
The prompt
Przedni panel: Front panel 110 x 72 mm, thickness 2 mm. Make one rectangular screen opening 97 x 56 mm, centered horizontally. Position the opening about 4.5 mm from the top edge. Round the outer corners R6 mm. No other holes on the front. Tylny panel: Rear panel 110 x 72 mm, thickness 2 mm. Add 4 holes for M3 screws, diameter 3.2 mm, positioned 4 mm from each side edge. Add 6 horizontal ventilation slots, each 30 x 2 mm, centered in the rear panel with 3 mm spacing. Round outer corners R6 mm.
Parameters
| Name | Value | Range |
|---|---|---|
| Panel Width | 110 mm | 40 – 300 |
| Panel Height | 72 mm | 30 – 250 |
| Panel Thickness | 2 mm | 0.5 – 6 |
| Outer Corner Radius | 6 mm | 0 – 20 |
| Screen Opening Width | 97 mm | 10 – 290 |
| Screen Opening Height | 56 mm | 10 – 240 |
| Offset: Top Edge to Opening | 4.5 mm | 1 – 40 |
| M3 Clearance Hole Dia | 3.2 mm | 1 – 10 |
| Hole Offset From Side Edges | 4 mm | 1.5 – 20 |
| Vent Slot Count | 6 pcs | 1 – 14 |
| Vent Slot Length | 30 mm | 5 – 100 |
| Vent Slot Height | 2 mm | 0.5 – 8 |
| Vent Slot Pitch (c-c) | 5 mm | 2.5 – 12 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Orbital Launch Vehicle Display Model
Highly detailed, realistic non-functional space-launch rocket display model for 3D printing: 240 mm tall, 34 mm max diameter, tapered interstage, ogive nose, fairing seam, service