Emergency Department Floor Plan

System Role & Global Parameters Generate a highly detailed 2D architectural floor plan for a 1,152 square meter Emergency Department. The drawing must be top-down, orthogonal, and use millimeters as the primary unit. The overall building footprint is a strict 24,000 mm width by 48,000 mm length rectangular block. Exterior Walls: 200 mm thickness, continuous outline. Interior Walls: 100 mm thickness. Central Corridor: Create a continuous 3,000 mm wide main hallway running vertically through the exact center of the building, separating the left and right wings. This is a "Spine Block" layout. Departmental Zoning & Dimensions Map the following enclosed rooms snapping to the exterior walls and the central corridor. Bottom Right: D1 Registration (5,000 x 6,000 mm) adjacent to the main bottom entrance. D2 Triage (6,000 x 8,000 mm) directly above D1. Middle Right: D3 Treatment/Trauma (12,500 x 20,000 mm). D5 Examination (7,000 x 12,000 mm) directly above D3. Top Right: D7 Observation (14,000 x 23,000 mm). D8 Discharge (3,000 x 6,000 mm) in the top right corner with an exterior exit door. Bottom Left: D4 Imaging Hub (10,000 x 10,500 mm). Middle Left: D6 Laboratory (5,000 x 9,000 mm). D9 Medical Supply Warehouse (10,000 x 15,000 mm) above D6, featuring an exterior receiving door on the left wall. Top Left: D10 Cafeteria (10,000 x 10,000 mm). Auxiliary Facilities (Restrooms) Integrate 10 decentralized restrooms into the floor plan, each measuring 2,000 x 2,500 mm (5 m²). Place 2 restrooms near D1/Waiting. Place 3 restrooms along the corridor outside D3/Treatment. Place 3 restrooms inside D7/Observation. Place 2 restrooms near D10/Cafeteria. Include a standard toilet and sink symbol in each. Architectural Details & Furniture Doors: Add 1,000 mm single swing doors for all standard rooms (D1, D5, D6, D10, Restrooms). Add 1,800 mm double doors for high-acuity zones (D3, D4, D7, D9). Furniture: Insert 23 basic rectangular hospital beds inside D7. Insert 10 rectangular beds inside D3. Insert circular tables with square chairs in D10. Text Labels: Center an MTEXT label inside every room stating the Department Name and dimensions.

Parameters

Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.