Plates and panels
Electrical Distribution Equipment Assembly
- Bounding box
- 18500.0 × 8020.0 × 6500.0 mm
- Engine
- Precision B-rep
- Parameters
- 48
- Published
- November 2, 2026
Download
Free to download and use. See the terms.
The prompt
Generate a professional AutoCAD Electrical drawing of a complete Utilities and Power Distribution System for a commercial building. The drawing should include the utility incoming power supply, transformer, HT/LT panels, main distribution board (MDB), sub-distribution boards (SDBs), busbars, circuit breakers (ACB, MCCB, MCB), protective relays, CTs, PTs, surge protection devices, diesel generator (DG), automatic transfer switch (ATS), UPS, capacitor bank, earthing and grounding system, lightning protection, cable trays, conduits, cable routing with cable sizes, and equipment labels. Also create a detailed Single Line Diagram (SLD), panel schedules, load schedule, legend, title block, dimensions, annotations, and standard IEC/IEEE electrical symbols. Use proper CAD layers, line weights, and engineering drafting standards. The drawing should be fully editable, accurate, and suitable for professional engineering documentation in DWG/DXF format with a clean, organized layout on A1 sheet at 1:100 scale.
Parameters
| Name | Value | Range |
|---|---|---|
| Building Length | 12000 mm | 8000 – 20000 |
| Building Width | 8000 mm | 6000 – 15000 |
| Building Height | 3500 mm | 2500 – 5000 |
| Wall Thickness | 200 mm | 100 – 400 |
| Electrical Room Depth | 6000 mm | 4000 – 10000 |
| Utility Entrance Length | 1000 mm | 600 – 1500 |
| Utility Entrance Width | 800 mm | 600 – 1200 |
| Utility Entrance Height | 300 mm | 200 – 500 |
| Transformer Length | 2000 mm | 1500 – 3000 |
| Transformer Width | 1500 mm | 1000 – 2000 |
| Transformer Height | 2000 mm | 1500 – 2500 |
| Transformer Concrete Pad Height | 200 mm | 100 – 400 |
| Bushing Height | 150 mm | 100 – 250 |
| Bushing Diameter | 80 mm | 40 – 120 |
| HT Panel Length (X) | 800 mm | 600 – 1200 |
| HT Panel Width (Y) | 800 mm | 600 – 1200 |
| HT Panel Height | 2200 mm | 1800 – 2500 |
| LT Panel Length (X) | 1000 mm | 800 – 1500 |
| LT Panel Width (Y) | 800 mm | 600 – 1200 |
| LT Panel Height | 2200 mm | 1800 – 2500 |
| MDB Length (X) | 1500 mm | 1200 – 2000 |
| MDB Width (Y) | 800 mm | 600 – 1200 |
| MDB Height | 2200 mm | 1800 – 2500 |
| SDB Length (X) | 600 mm | 400 – 800 |
| SDB Width (Y) | 400 mm | 300 – 600 |
| SDB Height | 1200 mm | 1000 – 1500 |
| Busway Cross-Section Width (Y) | 300 mm | 200 – 500 |
| Busway Cross-Section Height (Z) | 150 mm | 100 – 250 |
| Busway Elevation Offset Above Cabinets | 500 mm | 200 – 1000 |
| Diesel Generator Length | 3000 mm | 2000 – 4000 |
| Diesel Generator Width | 1500 mm | 1000 – 2000 |
| Diesel Generator Height | 2000 mm | 1500 – 2500 |
| Exhaust Pipe Height | 800 mm | 500 – 1500 |
| Exhaust Pipe Diameter | 120 mm | 80 – 200 |
| ATS Length (X) | 800 mm | 600 – 1200 |
| ATS Width (Y) | 600 mm | 400 – 900 |
| ATS Height | 1800 mm | 1500 – 2200 |
| UPS Length (X) | 1200 mm | 800 – 1500 |
| UPS Width (Y) | 800 mm | 600 – 1200 |
| UPS Height | 2000 mm | 1500 – 2500 |
| Capacitor Bank Length (X) | 800 mm | 600 – 1200 |
| Capacitor Bank Width (Y) | 800 mm | 600 – 1200 |
| Capacitor Bank Height | 2000 mm | 1500 – 2500 |
| Ground Rod Length | 3000 mm | 2000 – 4000 |
| Ground Rod Diameter | 20 mm | 10 – 40 |
| Air Terminal (Lightning Rod) Length | 1000 mm | 500 – 2000 |
| Air Terminal Diameter | 15 mm | 10 – 30 |
| Air Terminal Corner Offset | 200 mm | 100 – 500 |
Every value above is a live dimension. Open a model like this in the editor and each one becomes a slider you can drag before exporting.
More models
Browse the full gallery →Conveyor Belt Assembly
You can create a CAD model of a conveyor belt with a canvas for furniture weighing 350 kg with sheet metal shoulders and height 850 length 6000 and width canvas 1100
3-in-1 Adaptive Jack Head
Create a highly detailed professional mechanical engineering CAD drawing sheet titled: “3-IN-1 ADAPTIVE JACK HEAD – LINE DIAGRAM & DIMENSIONS” Subtitle: “ALL DIMENSIONS ARE IN mm”
Adjustable Bracket (Laser Cut)
Give a good laser cutting pattern in 1.6mm thickness sheet
Micro‑Needle Array with Counter‑Bored Port
A single-panel image, presented in two separate but similar side-by-side isometric views on a light blue-grey background, of a precise micro-fluidic device component. The component
Flat Sheet Metal Plate
Generate a flat rectangular sheet metal plate with a width of 55mm, a length of 80mm, and a uniform thickness of 5.28mm
Flat Bolt-Pattern Disc
Create a flat circular disc with an outer diameter of 280 mm and a thickness of 6 mm. In the exact center, add a through-hole with a diameter of 8 mm. Surrounding the center hole,